Search results

I don't think repairing or modifying is a lousy suggestion, and I don't believe replacing the front transmission cover is better advice if a reasonable and cost effective repair can be achieved.

I may have missed something in your statements. So the engine cranks with the installed battery when jumpered at the starter from main terminal to solenoid? You have power to the solenoid spade terminal on the starter? Have you removed and cleaned the main negative battery lead both ends...

I've own and use metric die nuts, a word of caution, mine generally cut/clean a little deeper than standard pressed threads. Different brands may also cut different depths, since your spigot is already galled, in preference I would buy an adjustable thread tap to carefully clean your existing...

Re: 2650 parts diagrams and service manuals Depending on your exact model and what info you need, this B2650 service manual may be of some use. http://www.kubota.cz/data/soubor/WSM_B2050_B2350_B2650_B3150_EN.pdf

Nothing is 100% from afar, however this appears to be a classic bad battery or bad battery connection, as when a load is applied, either the battery can not supply the load, or the poor connection fails. Remove and clean battery terminals and ground connections, check battery. If you can jump...

I'm not up on the location of the filter on your machine, but if not a double gasket leak, is it possible the filter or housing has sustained a knock from something like sticks or rough terrain?

I haven't checked for variations/differences between the 225 and 285, but there is a L285 wiring diagram in this manual, as well as other useful info for future use. Page 61 of the manual, 60 of the pdf https://www.manualslib.com/products/Kubota-L285-4158600.html

https://www.messicks.com/part/16457-36410/gauge-oil

He'll make a big mess if he does as it appears to be pressure fed filter on the 2100 at least.

Re: Gx2110 steering issues Here's a service manual for a gr2100, previous model, may not be exact, but may help out some. I couldn't find a GR2110 around the net at a quick glance. http://www.kubota.cz/data/manualy/gr-2100-wsm-en.pdf

Re: Gx2110 steering issues If you have disconnected or upset any suction hoses/clamps etc., you could also have a suction leak allowing air into the system

Pull the suction strainer and check for debris. https://apps.kubotausa.com/illustrated-parts/

Here's a shop manual to get you started, I don't have time to diagnose ATM, could be something simple like air in the system, someone will steer you in the right direction........... http://www.kubota.cz/data/manualy/f-80-wsm-en.pdf

If it works and it's cheap, and you can make it fit, who cares what it is! Shoot woods an email with pics, they'll tell you exactly which model I would expect.

I don't have the manual for your tractor but a similar engine is in other models, 73-80 ft/lbs from here https://www.manualslib.com/manual/1101745/Kubota-L185.html?page=1#manual North Idaho Wolfman may have a manual squirreled away for you tractor

And for others down the track, you can give this one a go, may help someone out, covers 185, 235, 245, 275, 285, 295, 305, 345, 355, and if you need something not covered by it, you can always ask NIW if he has something else squirreled away. EDIT: Same manual as listed by Dave_eng in post 2, I...

Any lights when you turn the key on? Make sure it's out of gear, wheels chocked, fuel shut off pulled, use a jumper from the main battery lead on the starter solenoid to the small spade terminal on the solenoid and see if it wants to crank.

There is oil in the transmission for sure? Was there any abnormal noise when you used it last? How did it actually fail, was working fine and parked up, then went to use it and no go at all, or did it start to slow etc., over how long, or something else? The oil strainer which will be on the...

Land Pride's SA20 is a lighter planetary drive Post Hole Digger ideal for land owners, landscapers, hobby farmers, or contractors. The Land Pride SA20 digs holes from 9" to 36" in diameter and up to 48" deep or deeper with available auger extensions...

I have seen extensions for bigger hydraulic drive augers on bobcats/excavators etc. I have them for my small petrol powered digger, they came with the unit. I am making my own for my tractor, but one has to be aware of the forces involved with a reduction gearbox and things can screw and go...