Search results

Like everything, when used incorrectly, bad results. I think the advertising of the product is to blame for the damage by the masses that use the stuff. Where's the pics lugbolt?

Have a look underneath at the rear links and see if it has locking pins to install when it's fully up to hold it in place so you can use the 3pt.

Thanks NIW, I'll download the manual and see if I can find anything on the factory valves.

My toro mower deck is designed to be lower at the front, check your manual for adjustment and specs. Also when it's hanging is different when it's running on the ground on the gauge wheels generally.

Yes extensions can be used, however, the problem arises when you need to lift, and disconnect/remove the extension whilst retaining the auger. So you either buy/build a longer frame and longer pto shaft, or make something to go across at ground level to clamp and hold the top of your auger shaft...

I know what a power beyond lop is and how they work, I've even got one on my B21. What I'm interested in is the valve configuration differences between the 9 with factory auxiliary hydraulics, and the 11 ft with auxiliary valve? Do you have the schematics for the options on offer by any chance?

Workshop manual including wiring diagrams here, it may be different being a non USA model, but may be of some assistance in the future. Maybe ask your friendly dealer if they'll give you a copy of their manual if you bring in a USB memory stick? www.kubota.cz/data/manualy/l-30-wsm-en.pdf

So does the 9ft run with the existing remotes?

I could be wrong, but I didn't think they offered the backhoe loop in the larger M series, I thought they only came with a set of remotes and optional additional remotes, so I can see the dealer only offering that combination, and not straying from the standard OEM offerings. Happy to be...

Do you need your remotes for something else at the same time, or can you plug your driver into them? Is your driver open center or closed center hydraulic system. Does it come with 2 hoses with quick connects? Generally, a remote may be able to be used for implements with the aid of a bungee...

I don't quite understand the approach taken here................

That's not going to work, either it missed the oring groove machining or the spool plate needs to be flipped 180 degrees to the other face? Does the spool plate have orings on it, and also on the base plate?

Since it's leaking, you'll likely need to remove again, undo it and take pics of each plate.

Yes there would need to be orings between the block faces around the port entries, if there isn't it's not going to work. Perhaps the orings are part of the original spool face, and since sandwiched to the original plate, now need to be replaced to get a seal to this new plate. Be aware that as...

Where is the oil leaking from? Check all oil levels, engine, hydraulics, and radiator fluid. Check your hydraulic breather isn't clogged.

As most folks won't have seen your exact valve, some pictures of the offending fittings would be invaluable to receive an appropriate response.

More likely that the person in China throwing these together at a rate of knots has just wired it wrong, or the contacts in the switch are stuck. There's not a lot in them, so if you have some basic skills, you should be able to sort it, with the help of NIW or others. Thinking about it, there...

Drain your tank while you are at in and have a decent look at what's in the bottom of it.

Ahhh, they've fixed that now, you'll be right to do it again in 18 months!

Re: Help with B7800 Pedal Retrun Issue Try the link again, I copied the wrong link. The part is on page 91 of the parts manual or pdf page 197, item 50 You could have wear on 40 or 80, adding some grease to the sliding surfaces of these may help. However you could have other problems within the...