Search results

Eric, you have me curious. If you consider gravel light material what in the world do you move that is heavy? I have never moved iron ore but it would take a mineral like that or something in that class to be heavier than the lime stone and granite we have down here in Georgia.

Not sure about that model but my old B 7100 had a pto driven pump for the loader but it was driven off of the front pto shaft that is on the engine with the pump mounted in between the front frame rails. Don't know if you have one but it worked good for me. I can imagine your's is tricky to...

No problem. If I can help you out with any other questions or concerns you have with this model just let me know. I'm not a mechanic or anything like that but I did grow up and still live on a farm so I do have some red neck fix em up knowledge that I have aquired over the years.

Hi rail, I have a L 3000 DT that I bought new in 2000. I have had very good service out of mine. It doesn't have very much fancy stuff on it like some of the higher priced models. Good if you want a simple tractor but it does lack in some of the comfort. I added a step to mine so it would be a...

Even though antifreeze won't freeze it does loose it's ability to disapate heat. It needs to be changed every two yrs to keep it in good shape. Even if it looks good and clean it still can be bad. As far as flushing goes I will drain the radiator and then refill it with water and then drain it...

I changed my oil at 25 hrs and after seeing the amount of metal that came out of the trans case I filled it with cheaper oil and changed it at 50 hrs as well. At the 50 hr mark I installed Amsoil fluid thru the entire machine. It sounds like the low number of hrs that you are putting on your...

You will really enjoy the 3010 over a 7100. I had a 7100 and went up to the L 3000. With the B and a 4 ft finishing mower it took 14 hrs to mowe 14 acres in the best conditions and the L with a 6 ft mower I can do it in 4 hrs if I run hard. I normally don't go that fast but I have done it...

This is what is rated for the L 3000 with 11.2-24 tires: 1st - 8th .9-1.1-1.6-2.7-3.4-4.5-6.4-11 mph These speeds are at rated engine speed. Yours may be a little different but maybe this will be close enough.

My B 7100 had rear hubs like that on it and it was a mid 70's model. Those hubs are new but I had the same style on mine from the factory. If I remember right I only had 4 lug front wheels though.

Sounds like you got very lucky. How long did it take you to get the mohawk pressed down out of the seat after the butt cheeks slammed shut? :D:eek::D

I would have a hard time telling you which way to go on that one. I have a box scrape and it gets used all the time. I also just installed a set of bolt on teeth on my loader bucket and love them as well. To me they work great together and each have their place. The box scrape is by far the...

One of the guys passed this place on to me so I will do the same for you. They have a complete grapple kit for loaders that looks pretty neat to me. Look down on the lower left side of the page under the loader section. Grapple kits/hydraulic kits http://www.gearmore.com/products.html

I was on the phone with my dealer when I read your post and took the opertunity to ask him. He told me that he sold the same model as your with tooth bars on them all the time. Two last week for a father and son and he said he had one in their shop right now that was getting a new tooth bar...

Looking back on the first post. If the power is leaving the switch but not making it to the relay then trace the wire. If you know for sure it's leaving the switch then you must have a broke wire. Maybe try hooking a new wire from the switch to the relay and see if it cranks.

I pulled a 50" tiller with my 7100 and it did fine.

Have you tried to wiggle the shifter when you tried to crank it? I had problems one time with the safety switch on my L 3000 shifter. It was just a little out of adjustment and it wouldn't crank unless the shifter was held in a certain spot. Just a thought.

Thanks for all the info.

Thanks for that thurough walk thru. I have seen the hyd top link many times but I have never seen a set up like yours. I like the way that sounds. Just out of curiousity if you don't mind, How much did that setup cost and does it come in a complete kit?

I can see where that would be very handy. I'm assuming that the 3pt will work like normal plus you will have down pressure when needed. Is that how it works or do you raise the 3pt with the new cylinders now?

Hi Vic, just be glad that Kubota doesn't make a manure spreader.