Search results

If the goverment was to ban guns from being owned by private citizens then the only ones that would have them would be the criminals. How many criminals do you know or have ever heard of that care if their guns are legal or not. If you don't like guns that's fine with me but in the same sense...

Nice web site Eric. They seem to have some good prices.

He also had a big wood working project he was working on for a school play that his son was in. He told me that the internet at home being down was about to drive him crazy.

Try this on for size. Cat equipment that has the GPS system on it is monitered from the satelite and every system on the machine can be tracked while it is running. What do you think about a machine that is smart enough to order it's own parts, track their delivery date and scedule a mechanic...

It will depend on what model you have as to what you will need to do but it is a simple process. My old B series had a small bolt on the pump where the fuel line hooked to the pump that you could loosen just a little then crank the engine over. As the engine turned it would allow the air to...

The county road department uses them alot down here behind the tractor that has the side mower on it. It seems to work great for them when they are having to cut around mail boxes and such. I would like to have one myself.

8x20 sounds good but 8x30 goose neck would really be nice.

Keep in mind when you go to look at trailers that a 7000 lb rated trailer won't really haul that much weight. You have to factor in the weight of the trailer as well. A 16 ft double axle normally will weigh 2000 to 2500 lbs empty. Another words your BX would put it at above 2/3 capacity. I...

I mounted a small tool box to the right side fender. Also works nice for a arm rest.

This will fix what you right up. Works like a champ. If you can get a straight shot at the ball on the fitting this will grease it. It just slides straight on and then locks in place. I ordered mine from www.thetoolwarehouse.net for about $9.

If my oil was dirty enough to need changing at 20 hrs I would be wanting to know what was wrong with my engine. At 20 hrs my oil still looks like it did when I poured it in.

I agree. PTO equipment is designed to operate at the rated RPM so they will work properly. If you run at a lower rpm you are not only lugging the tractor engine but also putting unwanted strain on the emplement as well. The main thing to remember no matter what the task at hand is not to lug the...

Since the front end is geared just a little higher than the rear is the 4WD is kind of in a bind a lot of the time. My tractor seems to come out of 4WD better if it is moving and I cut my wheels to the right. I never even try to take mine out with the wheels in a straight line. If it's to where...

Amsoil Heavy Duty Diesel 5w30 for your Kubota. Amsoil Synthetic motorcycle oil 20w50 for your Harley. I run Amsoil in everything from my R/C cars to my M 9000. Two stroke, engine oil, trans fluid, trans/hyd oil, gear oil, gas treatment, spray lubricants and protectants, filters and grease. I...

The only place that can happen is where the engine drives the hyd pump. If the seal is bad it's possible for the fluid to transfer.

It's possible. If the engine is overheating it may be causing more than a normal amount of oil vapor to go to the breather and then when it cools done as it's coming out it will change back to a solid state (oil) and run out causing all your mess. You need a good clean radiator anyway so it...

Have you washed the radiator out good? Sometimes they are a real pain to get all the dirt out of them.

I think that Kytim is right. I think that a couple of lights would be fine. If you want to double check it before you mount them get a volt meter and check your battery with the engine off and no current being drawn from it so you will have a base line to go by. Crank the tractor and check it...

Thankyou handy, That is the one I was sitting in when I was on the phone with you yesterday. I really do love that tractor. It sure is a lot better in the field than my other one with no cab.

As long as you don't have any leaks I wouldn't worry about it. Like Eric said it's always much safer to lower everything to the ground anyway.