Search results

If mountain man can't help you I have what you're looking for.

I have what you need.

Tell us more details. When does it overheat? How long does it take to overheat? What are you doing when it overheats? What is the temperature outside when it overheats? Years ago I worked with these tractors having overheating issues. Be sure you have a radiator shroud around the fan. Be sure...

The steering on your tractor is separate from the hydraulic system. The power steering reservoir is on top of the engine and has a dipstick on it. I would check all fluids and clean it up and be sure you don't have something running down from above the transmission housing. All of the steering...

They are getting hard to find. I just sold the last two set I had. Many of them have been lost moving down the road. Chech with All States Ag Parts. Many of the 50 series side covers will fit.

The last one I bought from Amazon was a Denso just like the Kubota one. 1/4 the price. I would not be afraid of the Amazon regulator.

Are you pushing oil out of the Breather when you were lowering the loader? If so try running the engine at a little higher RPMs when you're lowering the loader. The problem is your returning oil to the reservoir faster than you are pumping it out. This is a problem with this loader as it has an...

One simple place you may look is the relief valve located in the oil filter housing. Not a place that you see problems very often but it does happen.

What loader? Is it a Kubota model 1200 ?

If there is nothing wrong with your cylinder head by a aftermarket kit for the head . take it to reputable machine shop and have the head rebuilt. I have used many parts from kumara brothers. Have not had any issues with them. I always use a genuine Kubota head gasket.

I have been buying them on amazon. About $10 each.

Does your tractor have a separate pump on the front of the tractor for the loader?

Do you have all the old seal off ? I think you still have part of the old seal in place. Turn the housing over and post a picture of it.

As others have said. Adjust engine valves. Check to be sure the decompression mechanism is adjusted properly and not holding one or more the valves open. Simple way to check that is just loosen or remove the valve cover when the engine is running. Then do a compression test. Then you know...

I will check . I may have one.

The hoses have #10 JIC ends.

Removing the tires will definitely help. Running the tractor for a short time and getting the oil warm will help as well. If you have time the best thing to do is let it sit overnight and drain. Google formable funnels. That's what I use and and don't have to take the tires off. Works the same...

Actually there is. They have stores and quite a few countries.

Upright became American Grape Harvester. You may call them. They are located in Fresno California. They used to build the upright man lifts and grape harvesters. Now they only build grape Harvesters and dump trucks

Go to a good NAPA Auto Parts store they can find you a filter by dimensions