Search results

I purchased this and use a chain wrapped and fastened to fork base plate. I have used it on several trailers the biggest being 7k lbs. Fork hitch

Another option, You might consider calling a couple of tow truck companies in your area. Most will have a roll back truck same capacity as the equipment dealers use. Most should price based on loaded mileage and may bump it up a little if you are a long way from towing company. Towing companies...

Another option. JD Q.A. adapter

I have a W.R. Long 64" grapple. It weighs about 500# my tractor and loader handle it very well. I purchased it from a BX owner that his dealership told him it would be a great match for his tractor that does not have rear tires filled. I got a great deal on the grapple. I also add about 1K of...

Thanks for the info. I sure wish Kubota had installed that switch on my model of tractor.

Last year I was charged $1100 for the air ride seat. No mention of discounted price or upgrade and dealer keeping the stock seat. Something to discuss with dealer when purchasing the tractor. FYI, The only downside to the air ride seat is you lose the ability to run the PTO when the operator...

I upgraded to the air ride seat when I purchased my tractor in 2020. Several reports and posts about stock suspension seat bottoming out with drivers that weighed 200lbs or so. Many other posts on how to modify the stock suspension seat to avoid bottoming out. The final factor in my decision was...

Look at the Grand L 60 series. Very roomy operators station. I am about your size and have size 14 shoes and have no problems with the layout.

I have this on my tractor and so far it works great. I called the company and asked about trailering with sunshade mounted and the reply was they have not had any product failures do to trailering. They did state that if I was concerned, remove the top or load tractor backed on. Shade

Troubleshooting 101 , work from the easiest possible solution to the hardest. Fuesable link blown or intact is really easy to check and replace if needed. Just trying to help the guy out.

I had another brand of tractor that when the fuseable link blew it would do what you describe. My fuseable link looked like this. Fuseable Link

My 4760 Is a little loud at idle for the first 20 seconds or so after cold start up. I consider it to be normal and let it idle till noise goes away before accelerating.

I agree it is normal and that the dealer should check at the 50 hour service. I do not know if they checked it or not because the paperwork showed work description as 50 hour service and was not itemized. I am hoping my post will get others to look up there loader owners manual and re-torque...

Just wanted to pass on some info. I have had my tractor 1 year and have 120 operating hours. I did not receive the operators manual for the loader when I purchased the tractor and I was unaware about the requirement to re-torque all fasteners on the sub frame. I just finished and found several...

I believe Land Pride is the maker of the aftermarket kit. Neal at Messicks did a video recently and talked about Kubota kit and Land Pride kit.

I have a new take off from my 4760 if you are near North Carolina.

The first thing I did when I brought the tractor home was ditch those little pins. After 120 operating hours I have had no problems.

For some reason your post was inserted into my reply to post #3. I have not had that happen before. In post #4 I also stated L6060 was used on my FIL MX5000. I agree with you.

In this case I disagree. A tractor was purchased based on $$$ saved over the cost of several models. Now features of a deluxe model want to be added to a less expensive model. There is no Kubota guide on how to upgrade an MX to a more delux model and the parts guy is on his own to make it...

Been in the woods many times in the year since I purchased these. So far no damaged lights. lightguards