Search results

HF vs. Snap On test FWIW.

FWIW, I am also ready for 50 hr service. I talked with service manager about doing my own service and he recommended letting dealer do the 50hr because there are several check torque or re torque items that are not listed in the owners manual. All oil and filter swaps after the 50 do not have...

My KTAC story. On a family members 1100c the drivers door was severely bent when the door contacted a tree while the operator was backing. $250 deductible and a couple weeks later dealer replaced door. The next year, passengers door was severely damaged after contact was made with a large tree...

I have a 72" MSI with teeth that weighs close to 700lbs. With just loaded tires that bucket owns my 4760. With the Kubota ballast box loaded with gravel approx 900lbs and the loaded tires, it works very well for digging, grading and carrying large loads of materials. As a way to clamp on and...

My original post was about the Gearwrench, I have a one of those in 3/8 drive that I also like.

Lid-The hydraulic arms that clamp and unclamp. You can get a single large arm or a set of two arms. Two arms clamp better on odd sized loads.

https://topdogattachments.com/firewood-bucket/

https://www.everythingattachments.com/Construction-Attachments-Compact-4-in-1-Bucket-p/cal-bucket-mp-1mpcmp-compact.htm

Based on what I read the 83114 is an update to this part number. https://weingartz.com/PD/2614709/kubota-muffler-K3111-83113

https://www.griggsmowerparts.com/1917-8309.html?msclkid=971fbfb57fe613682a59dfe9cf9d1a95&utm_source=bing&utm_medium=cpc&utm_campaign=Griggs%20Mower%20Parts&utm_term=4585307090298120&utm_content=Ad%20group%20%231

I have the 30-250lb version. Very well built.

Maybe these items would work for you. https://www.specialtyrepairscustommods.com/l60-series-non-cab-step-l https://www.boltonhooks.com/loader-grab-handles/

Good reviews, decent quality. https://www.amazon.com/GEARWRENCH-85066-Micrometer-Torque-Wrench/dp/B00HQGI4CC/ref=sr_1_3?crid=14D36MN2R8RJA&dchild=1&keywords=gearwrench+torque+wrench+1%2F2+drive&qid=1616620047&s=hi&sprefix=Gear+wrench+torque+wrench%2Ctools%2C172&sr=1-3

FYI Good works video

http://cooltops.com/

On my 4760 I use 1200 rpm for warm up, 2200 rpm for all other non PTO applications. I also use Medium setting for Hydrostatic drive and use the low mode when digging and high when I transit. In 44 hrs I have had 2 Re-gens. Kinda old school now days but in the service we were trained to run...

Posting this for people searching on this thread title in the future. Using the link I posted above, I found several sizes ranging up to 3".

I thought I would add some information in case someone searches on seat problems in the future. I purchased my 4760 in October 2020. I had read about the OEM suspension seat and read complaints about how much weight it could support without bottoming out some say less than 200 lbs. I ordered the...

I had a heck of a time lining up FEL atachments to connect to my 4760. I found that if I lean far to the left and look outside the loader arm I can see much better to make the connection. I have an open station but I would guess it would work on a cab model also.

The sleeves with velcro or zippers is chafe protection for welding leads/LP gas hoses, I don't think it would hold up well on a tractor. I ordered this on Amazon, it is available in several sizes. Hose protection