Search results

I agree with NCL 4701. Purchased my tractor 10/20 and now have 68 hours operating. Regen about every 20 hours. I operate my tractor at 2200 rpms and just keep doing whatever I was doing until re-gen light goes out. Re-gens take about 15 minutes to complete.

Maybe call Grammer or check web site to see if they offer different seat mount options. Grammer tech guys are really nice and have no problem talking to customers. Grammer

When my tires were loaded at the dealer they filled the tire 100% and did not leave a 20% space for air to cushion the ride. Something to check.

On a Grapple you will not have any function problems using an adapter. If it was a high flow attachment you might see a problem. This is what I use to swap grapple over to skid steer. Adapter

Tell the dealer to set the rear tires to the widest setting and make sure tires are loaded. When you get it home, set tire pressure to 15 psi. It is a huge improvement in ride quality and traction vs. what the dealer aired the tires at.

I get it now. On the Messicks parts site they refer to that #7 piece as a blade holder.

You might want to go to the parts counter at your local Kubota dealer. Someone remove the two cup washers and added lock washers? Lock washers are not needed if the bolt is torqued correctly. This info is from my ZD series WSM. My deck is very similar to your deck.

I put about 100hrs per summer mowing. I change blades 2x per year. I have been using these blades, they are much less expensive then the Kubota blades. Blades

15 psi

I have used these blades on my ZD 323. In my sandy soil they did not last much longer than the OEM blades and they cost more. Hopefully they will work for you.

We removed the old arm and went to Kubota dealer with a decent inventory and matched to a newer tractor with adjustable arms. The dealers are not eager to match stuff up sometimes on older equipment. The would rather you buy new with the features installed as a package. To convert a MX 5000 it...

The only suggestion I have that has not already been covered is back down hills when loader is full. I slid like described in post#1 but I was in 2 wheel drive and applied the brakes.

I would start a new post topic with 4160 in the title. I think you will get more feedback than on a topic from 2014.

I messed up the P/N on the ballast box. The P/N is L8170 I added a K to it. I ordered the box the end of October 2020 and it was in stock Kubota facility in Ga. It took a couple of weeks to be delivered to my dealer. The box is MFG in Canada and is well built with mostly 1/4" plate. lifting...

The Kubota ballast box rated for 1,000lbs P/N KL8170 has reversible pins and can be used as Cat 1 or 2, mine cost $600. Expensive but very well made. I have a 4760 that rode very rough and lost traction on ground that my old tractor with r4s had no problem with. A few days ago I looked at the...

These guys sell filter kits that are from VG quality MFGs that meet or exceed Kubota specifications but are not oem Kubota filters. https://www.crossfilters.com/collections/kubota

You are correct, I should have used the Wix filter lookup as a Link Wix it has all of the information and specifications for the filters they mfg (See below). I pulled the trigger too quick on my lookup source. My problem with Kubota and the dealers is they all say (Recommend) use genuine...

I run Wix 51334 on my three Kubotas and as an added bonus it fits my Subaru also. The 51334 crosses over to the Kubota short oil filter. https://www.oilfilter-crossreference.com/convert/Wix/51334

https://www.tirepressurecalculator.com/

Maybe this wil give some usefull information?