Search results

My SSQA was bent much worse than shown in your photo and could not be straightened ( Photo Left ). KTAC replaced SSQA and I took damaged SSQA ( I asked for it back and Dealer said no problem) to a local welder that had experience repairing tractors, farm equipment. He had repaired damaged SSQAs...

When I used to sharpen, that was my preferred balance method also. I recently replaced all three spindles at 1500 hrs of use in my dry sandy conditions.

My factory fill was gear oil and the level was low when I checked everything over when I got the tractor home. Called Dealer and they said top off with Gear oil. Service manual may show both because on the smaller models listed < L4760 use a lighter rated axle and loader. My guess is UDT 2 is...

Those of you that are sharpening your blades, are you then re-balancing the blades? Any concerns of spindle damage due to running unbalanced blades?

I have the same model of tractor and I have noticed that the front axel is not vented. Could pressure build up in the axel case and cause a seal to leak? I believe that is possible. I have seen where someone is making a kit to install a vent on the front axle but I think it was for the BX...

The products you listed are made for gasoline that contains Ethanol and stabilizes the gasoline as well as reducing the bad affects the Ethanol. Others have steered you toward Diesel fuel additives.

I purchased a HSM service manual from Ebay for $40 for the download. It covers L 3550 - L 6060 order from dealer is also available. Kubota parts

Answer 1) You select a different screen that shows PTO functions on that model of tractor. It also shows ground speed on the PTO screen. Answer 2) 1034 = the time, clock

Plugged several tractor, zero turn, ATV, RTVX tires and the all sealed up fine and ran the tires for several more seasons. Low speed off road use I think it is safe.

I have sandy soil and mow about 100 hours per season. In fall after leafs are done I do a complete service on my ZD and replace the blades.

I would guess Transmission seal is leaking. That is a housing vent for condensation and no oil should come out of it. I could not find any information about it in owners or service manual. I did find a previous discussion about the Vent . I also found a exploded parts view that shows the vent...

You might want to re-post and ask for input from people that have mowers with air ride seats. Kubota offers mowers that come stock with that seat and others that can be upgraded to the air ride seat.

Don't disagree with anything you posted. As a buyer beware note, lots of commercial three phase equipment is being sold on FB, Craigslist, Ebay etc. Most folks do not have the ability to run that equipment at our homes. So I would say pay attention to what is being offered and ask if it is...

Something to look at while you are shopping for 3pt mowers. Check the minimum cut height. I have a heavy duty 72" rotary cutter that set at the minimum height will leave 7" of grass. A 60" will cut to about 4" based on my Land Pride RCR 2060. For foot paths I like shorter grass.

I have an Everlast multi-process welder MIG, Tig (DC only), and Stick. Not as inexpensive as some on Amazon but less expensive then Miller, Lincoln, ESAB products. Mine is the MTS 251i. My local Community College has welding classes on Saturdays from 8:00 a.m. to 2:30 p.m. cost was $125 for...

Not sure how well 20 pto H.P. will do with a 5ft tiller. My old tractor had 25 PTO H.P. and would get bogged down in low 2 when first used in spring.

Back in March I severely damaged my SSQA plate. Total replacement cost was $1500. My cost was $250 with KTAC insurance. As previously mentioned when comparing costs make sure you are comparing apples to apples. My wife's family has 60 acres of land that I use my tractor to help maintain. KTAC...

Just to add, Warren oil makes and packages Super Tech, Amazon Brand, Kirkland brands, Oils found at Tractor Supply and many other private label brands. Good oil and it is affordable.

On my old tractor I stripped one of the oil pan plugs. I used a self tapping oil pan repair plug like those posted in the link. I had several oil changes using that repair and no problems of any kind. Amazon repair kit

I have a 64" grapple that weighs just over 500lbs. My 4760 has the same loader and lift ratings as the 6060. I have loaded tires and carry a ballast box that weighs close to 1,000 lbs. To me it is a good combination and has plenty of capacity.