Search results

Once you get the loader ironed out make sure you get the bucket you want. Light, heavy duty or multipurpose with 3rd function.

You can also download the free myKubota application and save it digitally or print a copy. The B2301, B2301-1 and RCK-32 are available online.

On a side note I hope your dealer gave you the option of using an older mmm version as a customer service. Kubota offers an adapter kit that allows the RCK60-30BA to be used under the LX3520/4020 instead. This kit is added to your LXxx20 mmm installation kit.

Have you tried bypassing (jumper cable) the negative/ground cable or clean the frame/block side where it attaches? You stated you’re losing 6 volts.

Kubota sent me a new cap back in 2018 for a BX2370 I owned. It was a fix (service bulletin) for a venting issue of the recovery tank cap. Maybe someone didn’t get the memo.

Here’s some LX3310 data. Depending upon your test equipment and experience level you can do Ohm, Mega-Ohm or use a Power Probe to locate the faulty circuit. I added cab and ROPs information.

Just a hunch. There are two switches (three if you have the optional mid pro) that communicate directly with the Intelipanel and the ECU. One is the clutch switch. The Intelipanel is telling you that there’s a communication error between the panel and the ecu. Your next clue is the Depress...

SW Michigan at breakfast time (7-8-24). Herd size is 13 and 7 to 9 will wander this close to our house while the others hang near the tree line.

This guy posted this in 2021 on an open cab L4060LE. He figures out auto throttle and cruise don’t play well with each other. I doubt this guy has that new ecu in 2021. I’d install it and see for myself but then again it’s your money to spend. Maybe that new ecu forces the auto throttle and...

If page 40 doesn’t help in the operating manual then you need to follow the linkage from the cruise control end to the hst pedal end looking for damaged parts or missing hardware. This will also include a checkout of the brake system since depressing both brake pedals simultaneously disengages...

The 50 hour safety switch check you’ll see there is no HST pedal check so no safety switch on the pedal. (Test 1 and 2 are designed to create a no crank situation.) Refer to the preparation for the test. If it still fails to crank then it’s time to get the voltmeter and find out where the...

Some things to consider are what IP rating do you require versus what your wallet is willing to pay. You may find this site brochure a helpful resource to get started and then use a search engine to find choices and option. Even Dorothy had to start somewhere...

Maybe this might help.

I use a pair of 10k ramps with built in bottle jacks that can increase the height. They work great and I can add two jack stands and then lower the bottle jacks before pulling out the ramps. I got these off Amazon. Use DuckDuckGo or Google to search for them or there likeness. I always level...

I think I would have just replaced the two primary fuses for the meter and ecu. The two backup fuses would be next. Sometimes a voltage spike, age or vibration does weird things to a fuse.

Try swapping out fuse #8. It’s a10A fuse.

You should have two pins for stowing the deck up. Some dealers install them on the rear of the mmm deck (see pictures) and some store them as loose h/w in your storage bin. Pictures show were pins fit on mmm front and where they go on an LX2610. Hope this helps.

It keeps me from firing up my Ariens snowblower and freezing so I’m a happy camper. The only thing to keep in mind if using a poly blade is the corners may bend slightly. You can see it in the front picture. The blade still performs the same. No regrets there either. I plow in 2wd in low gear...

I run the STB-1060 with single hydraulic servo (3rd function) for side to side control on a LX2610 cab model. The blade is poly vice steel. My driveway is asphalt and the parking area is concrete. The only ballast I ran was fluid in the rear tires. I added the rubber curtain on the top to limit...

Order what you need vice the whole shaft. That p/n is the whole enchilada.