Search results

Geo i have a ferguson to20 for parts i am running another to20 for mowing but will part with parts like that PM me if interested will talk on the phone

Quarter inch plate 1 inch key stock is spacers. UHMW plastic just dropped right in.

Tractor plu is correct you have to sell your self first dosn't matter what your selling / If the Customer dosn't trust or like you IT DOSE NOT MATTER HOW GOOD THE PRODUCT / YOU'VE LOST THE SAIL

Not sure the pto hp on you tractor? I run a 72" Behind my old TO 20 Ferguson they are only 20 hp engine hp

ducktape just rep some around oil filter wrench in a cople of spots just the size of the notches on the nut

Daferris is correct home heating fuel oil and diesel are the same

Have a skid steer attechment depot 72" duel cylinder root rake grapple 600lb on my L3130 / If i had to buy one agen i get a 60" or 66" Not because of WT "Might" be juse a little easer to maneuver arround & get in to places (Tractor has 72" bucket)

R What is the SSQA Plate your talking about ? Just Curious ? I have a bit of problum the other way hard to get pins into slots on bucket not so much on my grapple Thanks (Picture maybe?)

It has It has a T E F C moter on it put it outside in a (outhouse Enclosure) No Noise in the shop & safe if it blowes

Bought a pack of 10 - 5 male 5 female less thin 10 bucks on Eday all black not as strong as O.E.M. but work fine

THANKS

NICE ?? Were did you get the threaded funnel ??

Had my L3130 split to change HST trans. There not much involved only a sliding spline coupling , there is a bushing were the shaft goes into the trans. go under & see if you can move the shaft left &righ up down to see if that bushing is going bad.

Not the best picture the nine small round things are the slippers and the steel ringAround the outside is What broke into pieces on mine have to buy both of those items number one Kabota Will not sell just one. One is the pump the others to slave

I have the original HST / The slippers are chewed up a bit/ steel slipper guide ring broke in pieces / you have to buy the slipper ,plungers, swash plate assembly from kubota $11k /used hst like $6,500 dont rember exact. / kept it because it still worked just boged down in high & mid range on...

Do not know how to get back to Old posts on this forum there are pictures of the damage internal HST partsThe bronze in mine was from the slippers the steel ring parts held the slippers in place

Had same issue my l3130 HST 1100 hr was the HST unit / Pull filters & cut open will give you answer brass or steel / if you have steel you will have brass also / will post some pictures next post / ended up buying a used HST on line.

I would use somthing else tri-clor in break clean will dry out plastic or rubber. / wd40, cr6, gum out just my 2 cents

Gut one of thos 300 gal toats the top was cut out . the company that was selling them $50. for un cut talked the guy down $10 after he put it in my truck said O gust take it. Works great have trimed sum branckes but realy got it for picking fruit from my trees.