Search results

  1. F

    L3130 HST mid, & high travel issue

    I have the same isue as little fork farm / mid. gear & high full throttle on the road any small incline engine bogs down big time /parking break is definitely off/ p.s. tried it with brake ingaged basically will not move / as littlefork sead fine in low range / new to this tractor / not new to...
  2. F

    L3130 HST Mid and High Gear

    I also have a l3130 hst dose the same thing (Parking break is Definitely off) ran it down the road after reading post does react the same as you have mention / Also applied parking break it will barely move med. & high gear /Did the parking break off fix your bog down problum??
  3. F

    Grapple

    Thanks i think the long tang will be best for me also
  4. F

    Grapple

    New to the sight also new to kubota pro & cons on a root rake grapple or sckeleton grapple will probaly anser this myself use for brush 90% of the time / also have a add on tooth bar for bucket / just some feed back thanks ( l3130 & la723 loader 72" bucket )
  5. F

    Welding

    Lots of input on the WELDING ? In the time it took me to read all the input could have removed implement 1/2 doz times HAHA THANKS for all the input
  6. F

    Welding

    L3130 if you need to weld on a Implement when attached to tractor do you need to disconect any thing electical on tractor ??
  7. F

    Land plane

    Will make it adj, at some point in time / going to use a 2x4x1/4 lentle for front blade & 2x2 back blade / so far only welding wire & time
  8. F

    Land plane

    All complete except grading angles not pritty but will be functionanl
  9. F

    Land plane

    Bulding a land plain question / cutting angles/ do they protrude go below the plaining edge 1/4" yes no ??
  10. F

    Spare key

    Have a l3031 need extra key keys listed on Azom & Ebay list all kinds no l3031 / l3000 ,l3010 . l3240 skips over L3031 any body know if all "L" series keys the same THANKS
  11. F

    Adding third function, which one?

    Have a L 3031 with a LA723 loader whick kit TFK 2 or TFK 3 / Neither kit listes this Tractor or loader
  12. F

    3 point hitch

    Shut off valve right down in front of seat ""DA"" ME /Thanks for the response / Nice site / used yesterdays tractor form many times & still will have to TO 20
  13. F

    3 point hitch

    Cyl only have high pres, hose on the bottom / have a blade on hitch used it 2 or 3 weeks ago / have 6ft pipe extended on blade "O" movement / hyd loader works fine / have had heater on tarp over 1 hr "O" Movement
  14. F

    3 point hitch

    New to kubota's have a L3130 / 3point hitch will not lower worked a week ago / has bin cold hear teens & 20's frozen ???