Search results

  1. ccs

    1959 Allis Chalmers D17

    Since this is not directly Kubota related - I hope this "off topic" is the proper place to post this...if not, I apologize and it can be deleted. I have a couple of Kubota's (much thanks to many of the members here for my huge # of questions as I learned along the way, and still am)... I also...
  2. ccs

    Shear Pin or Slip Clutch

    Just bought a Land Pride 2072 -- slip clutch only way to go for me.
  3. ccs

    Grapple Advice

    Hi All...I too am looking for an EA grapple..I'm very torn between the Root Rake Grapple with the shorter bottom tines verus the single or double close Wicked Root Grapple..... Anyone have any advice or experience as to which might better..? Mostly scooping up tree branches, smaller logs and...
  4. ccs

    New to the Tractor world with a L2501

    Specially..which grapple did you go with ?
  5. ccs

    Planning on a MX5800

    The 24" may be good for scooping and leveling dirt - but if I could only have one bucket it would be the 16" or 18" -- but the comment above is also very viable - consider both - in the scheme of things its very few more dollars per month - and you have best of both worlds.
  6. ccs

    Pallet Fork Recommendations L4760

    Just bought the PFL3048 pallet forks for my L4060...
  7. ccs

    Post Hole Diggers...Land Pride

    I ended up on a PD25 with a 12" Auger....thanks all.
  8. ccs

    EA Grapple on its way!

    what had you guys going with the Wicked Root Grapple instead of the Wicked Root Rake Grapple...? consider the Land Pride SGC's ? I'm asking because I am looking for a grapple for my L4060 and am deciding between: Land Pride: SGC1060 - weighs 351 lbs. SGC1560 - seems heavy at 784 lbs. EA...
  9. ccs

    Reverse Tine Tillar RTR 1566/RTR2072/RTR 2570

    So I added a Land Pride RTR2072 tiller to my order this morning...think this will be the best option given the info I have. So the implements coming for the L4060 are: FEL: LA805 RCF2072 Rotary Cutter BB1572 - Box Blade GS1572 - Grade Scraper PD25 - post hole digger with 12" auger RTR2072 -...
  10. ccs

    Reverse Tine Tillar RTR 1566/RTR2072/RTR 2570

    Definitely not “set” on anything- but after watching dozens of videos and reading tons of stuff - sure seems like if your soil has ok conditions (not filled with big rocks) the reverse tine leaves a much more cultivated nicely turned dirt bed with one pass than a forward tine — am I wrong ?
  11. ccs

    New here

    Ffphil -- welcome to the site. While I think being on the OTT will certainly lend itself to receiving some bias toward owning orange - I have found most people on here to be politely objective. In terms of larger tractor ownership (something larger than a cub cadet garden tractor), I am...
  12. ccs

    Reverse Tine Tillar RTR 1566/RTR2072/RTR 2570

    So I'm looking at a Reverse Tine Tiller from Land Pride to go on my L4060 to put in deer foot plots...probably 3 plots .5 acre to 1 acre each..decent ground, good dirt until down deeper than a foot then some shale...but food plot for clover doesn't need to be tilled too deep so thinking be ok on...
  13. ccs

    Post Hole Diggers...Land Pride

    Mt View -- whats required for the down pressure kit ? I wasnt adding any valves on this machine as I plan to run all 3pt stuff....would I need a rear valve for the down pressure kit ?
  14. ccs

    Grease, Whats is everyone using?

    Ryan -- any idea what size yours are for grease zerks? another good amazon search that turned up similar to your is "Rubber protective end caps" -- but many sizes... 3/8" and etc.
  15. ccs

    Post Hole Diggers...Land Pride

    TEG -- you using a three point mounted post hole digger? I watched some you tube videos last night of the FEL mounted ones - may just be my inexperience, but the 3 pt ones sure look easier to use...
  16. ccs

    Post Hole Diggers...Land Pride

    anyone out there running any Land Pride Post Hole Diggers.. I'm looking at either the PD15 or the PD25 for a Kubota L4060...not sure which post hole model is most fit for the L4060. PD15 says 20-40hp and PD25 says 25-55. One of things I dont like about the PD15 is you can only get a 6,9 or...
  17. ccs

    Thinking of buying new instead of used

    kclark -- if you are not getting at least 15% off of the MSRP then you are leaving money in the deal... with the discounts you can negotiate and ability to finance at 0% for 60 months -- buying new is certainly my preference - unless its a really low hour machine that you know has been well...
  18. ccs

    L3560 / L4060...So confused.

    Anyone know which Land Pride Quick Hitch (QH) is the most appropriate one for a Kubota L4060..... QH05, QH10, QH15 ? Dont I also want to be sure it has the "Floating Top Link"? so it can allow the Rotary Mower to float up and down with ground elevation changes?? Is the floating top link the...
  19. ccs

    Torque Wrench(es) and accessories...?

    North -- I dont think either of those goes up to the ft-lbs my M5 torque spec calls for... Would this set cover most of my potential needs: https://www.northerntool.com/shop/tools/product_200649557_200649557