Search results

B2601 with SSQA...

I used the HF tow hooks as well. Serves dual purposes...tie downs, and winch rope return off snatch block.

:eek:...YIKES!!!!! Usually a local dealer will have names of fabricators in your area that will do onsite repairs. If the damage is isolated to that area, it shouldn't be too bad to have fixed. I'm in the process of making a "BH77 Thumb Mount" for my BH75 hoe. I WANT A THUMB!!! I have the...

VERY NICE!!!!!!

😄 😄😄...I was thinking the same thing!!!!

I fabbed up some long forks using 6" channel to use with a sturdy plywood pallet to prune some apple trees. I just adjust the height and pitch to where it needs to be, "lock out" the loader stick, and climb up using a ladder. I always apply the brake and use a rubber tire chock to insure the...

I replaced the headlight bulbs with these LED Bulbs and they made a big difference. I also have one ROPS mounted LED on the side of the lower section. Don't see the need/reason for multiple lights. I just have it on a magnetic mount so it's easy to direct it if needed. It does provide a lot of...

I'd check ATI Plates out!

If you have a "GOOD" battery, you might want to pull the dash next. There was someone earlier with dash/electrical issues and I recommended pulling the dash and making sure you don't have something like this... Under dash...

😫...little bastards!!!!!!!!!!!!!

The "Press" as earned it's keep!!!! I'v used it for a bunch of stuff. Here's a couple...

It isn't that big. I have it on casters so it's easy to move around. Here's the specs...

Pull the dash and see what's behind it... I wasn't having any electrical issues. I pulled mine as part of installing the 40 Amp Alternator Kit, and found the area was packed, and a couple wires stripped. Other than this, there were no signs of mice in or around the tractor. I only left it...

Just put your "Nikes" on and..."JUST DO IT"!!!! LOL

DAMN...I have a 2006 B3030, I paid way too much for mine!!!!! o_O 2009 B3030... $1.00 Shipping is a bargain at $151.20!!! Looks like PETER is a popular guy!!!

NICE JOB! That will definitely help! I have a HF 20 Ton Press that I upgraded with an air jack. I made a brake for it, and it's been awesome! I've bent some pretty heavy stock.

I don't run a MMM, I run a rear off the PTO...but I think he's saying the two linkages circled in red should go up and over into the hooks with the arrows. That would make sense.

I second extending the receiver tube back to the cross tube.

😄...that's my post he referred to. After posting my question, I just changed my front axle oil with Kubota 80/90. You should NOT mix oils. You should be able to tell what you have in there because gear oil has that "distinctive" smell! LOL

That normal. My hoe is off the tractor unless needed. When off and on the dolly, I use ratchet straps to keep everything tight. One on each side going from the foot steps to the front of the bucket. Another strap between the outrigger legs.