Search results

I appears, from your post, that you understand the issues with a 3 pt set up. Trying to add braces or other support still brings all the energy/torque back to the three point...and will stress the hell out of it. The backhoe is a heavy, long extension that exerts great force in multiple...

Easy...go to the dealers and look at other installations and figure out what you want...I actually got all the info I needed off of this web site... Figure out your rigs plumbing set up...I actually marked all of mine and flow direction...draw up a scheme and use garden hose to measure the...

Thanks Wolfman...I knew you would come through! I found that number and QA KU11 as the two that kept coming up in my research. I don’t know if they are the same thing or not...but I will try my dealer for the L2230.

I have been trying to figure out what the Kubota part number is for the factory QA for the LA 463... I bought the loader in 2009...new. I am open to other suggestions...but would prefer to use the proper Kubota parts. Any help or advice is appreciated, thanks.

I have an acre and a half that I do annual clean up from big pine trees...and am considering getting a bolt on grapple for my front bucket. The unit is the Titan 60”-72” bolt on. I have a 60” bucket and will be using it to load my dump trailer...usually two or three trailer loads. I will run...

Here is mine for reference...

I think that should be fine. If it bugs you then take it back and get the dealer to look at it...or beef it up. I beat the absolute hell out of my rig in boulder country...no issues and my welds in the same places are the same inconsistency as yours. Stuff breaks...learning to weld is a good...

To get things really going... It is still a plastic gun. If you are going to hunt with a hand gun (not really sure why...seems like a great way to wound an animal...not kill it...that is another debate)...get a real gun. You know...like a 1911 from Nighthawk or Wilson...just sayin...:D

Not hijacking...but curious how often glow plugs should actually be changed...is it an hours thing or how many years in service...thank you in advance. Following...

I use a magnet for welding on my tractor...grind a clean contact spot near work...no problems... You have to look for it here in the photo...

I have had the exact same pad on my 76 actually break...not sure how. I bent the unbroken part back by setting the un bent part down on a block of wood...pounded the bent part back with a 3 pound sledge...carefully. Welded it back up with a stiffener piece as well. No problems since. They are...

The cost of oil is not an issue for me...my question is...is switching to full synthetic with the different weight oil (5w-40 for syn vs.15w-40) better for the engine over the long haul? I have been using T4 for years....if the switch is easier and better for the engine. Tractor is listed in...

Selling in Nor Cal a once used Land Pride 60” Box Blade. Orange factory paint. Bought it and don’t use. I also have the Top and Tilt hydraulic rams and hoses as well if interested. Willing to make good deal to Orange Tractor folks...

Sorry for the loss...glad your family is safe... As a person not familiar with why barn fires happen...help me out. Is this because of harvest product storage...or the equipment catching fire?

I see you are like me...posting some projects here and on welding web...both great sites! And we both have orange...

Check with your DMV or state... Some states require rated chains and associated hardware to be used on public roads... Straps can stretch and snap under extreme loads in wrecks...you are not only supposed to tie it down to tow...but to remain safe during unplanned events like emergency braking...

Go on Welding Web forum...search for welding tables...incredible amount of good info on that site... Here is mine...made with 1/2 slats...

Well, I finally got a tongue scale...and did the whole adjusting load to figure things out. Best place ended up being about 1150-1200 on the ball. My research has lead me to get a WDH...setup rated for 1200. I went with a Equal I Zer 4 point anti sway hitch set up. I figured the 650 for the...

2006 3/4 ton Chevy crew. Just got the dump trailer. Still working on tractor placement to get the tongue weight set. Think I am going to get a WDH set up to be safe. My haul to dealer is way over 100 miles...

Check your state rules. Some places require a min number or type like chain. I use chain down low on the tractor....and a strap on the FEL and BH