I would first make sure nothing is binding with the deck or deck PTO shaft. Then I would focus on the reverse safety system. My 2100 "bogs downwhen I engage the PTO and move in reverse without first pressing the dash button to disable the reverse safety system. I wonder if the switch is loose or...
I was thinking jack too but the comment about put the stabilizers down spurred another thought. I would lower the stabilizers and the backhoe bucket to the ground. Have the bucket push off the ground to find a point that results in minimal stress on the pin.
Here is a pic of the swing frame off of Messicks. The is a bolt (030) that holds the pin in. Is it possible that the head sheared off on the side you are looking at but there is still enough on the other side to keep the pin from sliding out???
Thanks all. LOL--enjoying the youtube is good, youtube is bad discussion.
I looked at the Kubota options. Seems very pricey. Plus, I have read quite a few comments about "leaky valves". I don't know what to make of that.
I plan to add three remotes-get them all in while I am at it. Two would...
Do you mind sharing the cost and lead time? I plan to order one for my LA480 loader. The bucket, ahem, has a little too much character from moving way too big boulders. ;) In my area, I have not been able to find a replacement bucket with correctly spaced attachment points. There are plenty of...
Is there a good textbook or go to web site to learn about tractor hydraulics?
I want to add rear remotes to my older tractors (L3010 and L3710). I read about people installing them in forums like OTT but I never see a parts list. There are different valve types, mechanical and electrical...
I had a similar issue on a GR2100. If your engine rpm holds but the mower deck slows, I suspect that your PTO is failing. Check your hydraulic fluid level!
In my case, the hydraulic return hose became brittle and leaked fluid. I checked and topped off the fluid level before I started mowing but...
There are even more sinister theories out there. Many of these services use a company in China, BGI, to do the sequencing. They are cheap and linked to the government. It is riduclously cheap so popular. The data is used for bioweapon research.
Thank you. I suspect that shipping from Canada or driving 2000 miles round trip to pick up may negate the cost advantage.
Kubota seemed to have switched to 17.5-24 sized tires with the same size front tires. If I have to buy two, that size is more readily available.
I am trying to find a...
She's alive!
Almost four years idle since her bad "suntan", she started right up--rough at first until I purged the air out of the fuel line. The only part I changed so far is the fuel filter. One thing that was annoying is that the wire colors did not map to WSM diagram but it was easy...
I found the safety switch! It is easily accessible from the rear of the tractor near the 3pt lift arm. Sure enough, when the shift range lever is in neutral, the plunger is depressed (closed). If any range is selected (L-M-H), the plunger is not depressed (open). There is not any such switch on...
The seat switch may have been added in later years. I haven’t run my L3010 in 4 years (since the catastrophic transport) but my memory is that it needed to be in neutral, PTO disengaged to start. So I could start it from the ground. My L3710 requires PTO disengaged, clutch depressed to start. It...
I have the original printed one from Kubota that I purchased when I bought the tractor. The image posted above is from the online version available from kubotabooks.
There is nothing near the pedal that I can see. Looking at videos for later models, it looks like there is an externison of the...