Search results

And there are 3 available $100.:eek: Sounds fishy to me.

IF you go to Kubota.com Parts for the B2650 and look at the local options for the lA535 loader you will see the parts you have lost

Bucket level indicator. The hole just above the pin on your front end loader is where it hooks into. The end of the rod should not be bent. It should be straight.:rolleyes:

Reciprocating saw for the roots. :D

Look at LandPride. If you are buying your B2650 new and using Kubota credit, you will be able to finance it with your tractor. I believe there is one for the BX models, and then a larger one for the B series tractors. :D

I ran a LandPride rtr1258 with my B3200. I also have one for my current B2650. It covers my tracks and it will make a good garden bed in 2 passes in new ground.:D

If you have a 5' grapple, then I would suggest a 7' width on the trailer. 5' grapple or bucket, and you will only have 6" clearance on each side with a 6' width. Get brakes on both axles of the trailer. It will be a lot easier to stop. I had brakes on 1 axle of a tandem axle trailer when I...

My dealer wanted over $1600 for the 6' blade and $1700 :eek: or so for the 7' blade. They came with the skid shoes. No hydraulics for this price. I looked at the SSQA blade and the LandPride 72" rear blade. He offered me the LandPride blade for $875 and came down on the 6' SSQA blade to $1400...

My thoughts would be: Go to Tractor Supply or parts place and get the cheapest hydraulic oil. Fill your transmission with the cheap stuff and remove your backhoe using the hydraulics. :D

That looks like a very good price. That is 15% off of the price of the ROPS B3350 on Kubota.com. If that is for a cab version, that would be a heck of a deal.:D

That sounds like no fuel. :eek: Have you looked in your tank to actually verify that you have fuel?:p

Have you thought about calling Kubota credit and asking them?:D

CJN8 You are correct. 850 lbs per Kubota.Ca:D

You state that your dealer is the only one that has hauled your L39. I believe your tlb was shipped from the factory by truck in 1 piece, assembled. Dealers driver would not have used those links to strap the tractor down. You might think about replacing both of those links. Because, just...

You mentioned mowing a ditch, this might work: http://www.drpower.com/power-equipment/trimmer-mowers/tow-behind/ :D:cool:

could you give some details on bachoe?

No smoke and no fire, sounds like an electrical problem. I would look for a loose wire, or faulty safety switch. Look at the wiring going to your fuel pump. A loose wire to your fuel pump would act like this. Good luck.

Bx25 and the bh65 do the same thing. I expected that on the BX25, but not on the bh65. 1 function will take precedent over the other. When I bought the B3200 with the bh77, I found that I could use 2 functions at the same time. Your bh65 is a strong backhoe. I did a lot of work with my b2620...

Is there a slip clutch on your mower? What brand and model of mower do you have?

By using a harder bolt (gr5 instead of gr2), you are taking a chance on breaking something other than a shear pin. If you were only cutting grass or weeds, what broke the shear pin? Is this a new brush cutter, or one you have had for a while?