Search results

Sent from my iPhone using Tapatalk

I replaced the B2650 seat springs with springs for a B3200. I really liked the adjustable seat that came with B2650. But, when the bh77 was installed, the really nice suspension was removed. This summer I removed the rotating part and reinstalled the suspension part. I feel like it sits too...

For instance, a Woods bb72x weighs 804lbs and is 116" long. Just shy of 10' long. I have a bb48x that I use with my B2650. The 2650 would run a 72" Woods, but transporting would be a problem, because of the weight and length wood be more than the 2650 could handle. My thoughts only. Sent...

Looks like it's been rolled on its side. [emoji12] Sent from my iPhone using Tapatalk

Is the PTO lever, below the PTO position selector, completely disengaged? Sent from my iPhone using Tapatalk

I'm in. They don't have this problem on the bx25. Sent from my iPhone using Tapatalk

Re: What's a fair price on like new B3200 w/ 49 hours....are they reliable? Well, have you looked at a B2650? Same size as the 3350 or 3200. 6-7 hp less, but no emissions add on. Loader/backhoe are the same, and I believe the mmm is the same. Tph has position control. Split brakes on left...

Re: What's a fair price on like new B3200 w/ 49 hours....are they reliable? Look at Tractorhouse to get an idea of price. My Ex B3200tlb was a great tractor. I think it had over 200hrs on it when I sold it. It never had a problem. Though the backhoe did have a boom cylinder replaced on it...

White exhaust is unburned fuel, I think. Sounds to me like it is turning over to slow. Are you sure your glowplugs are heating up properly? Sent from my iPhone using Tapatalk

That is not right. The left should ride inside Of the right one. The left part will have the paint warn off after some use from working in the right saddle. There will be too much play in that set up. Sent from my iPhone using Tapatalk

On my B2650, I can engage the pto at any rpm with out a problem. The pto lever acts like the clutch on my x B3200. Just ease the lever forward, and the rotary cutter or finish mower spin up to speed quietly. Sent from my iPhone using Tapatalk

Most of the Kubota backhoe buckets I have used, the teeth are bolted on. Sent from my iPhone using Tapatalk

As I look at your set: I think you would have better results if it was mounted on the fel. Your backhoe would be a good counter weight. Mount your brackets inside on the bottom of your bucket. [emoji848] Sent from my iPhone using Tapatalk

Have your talked to a Kubota dealer? The flail mower and hydraulic hitch are both listed in the brochure. If you build a L6060 on Kubota.com, it is shown there also. About $15,000 for the setup:eek:.

IF you have a backhoe for your B3200, check the return line fitting at the back of your tractor. IF you have the backhoe off.

:eek: Wow! That would be painful and frustrating.

Out of curiosity, what broke on your tractor?

Well, it is a 26hp engine. And I think :D the threshold for DPF, or other exhaust treatments, is 26hp.

There is NO DPF filter on the B2650. :D

I believe the weight of your BX25 is over 2500#. 16' trailer Tandem axles. Brakes on both axles. Aluminum or wood. I hauled my BX25 on a 16' tandem axle trailer with brakes on 1 axle. This was behind a 3.0 Ford Ranger auto. I had no problem with weight distribution. But, brakes on 1 axle did...