Search results

Howdy I have a Side kick and was wanting to put a soft back and doors on it. Anybody done this that would recommend a any. Plus minus of doing it. Thanks Mike

I bought a Cyclone Rake leaf vacuum. I use a zero turn mower to pull it around, but rethinking that idea. Think lots of wheeleys when going up a grade. On my BX2380 I can get the deck adaptor to 8 inch opening and a three point hitch attachment to make it fit it. I will most likely do this...

If it is like a regular engine, it gets hot during running. Then it cools off after use, moisture builds up in the exhaust. When you start it up the exhaust gets hot starting to steam off the moisture. When it is colder moisture builds up faster. This is just me SWAGing an answer.

Try a slide on adaptor connector like one of these. Female adaptor

Ford Tough Chevy stupid.

The yellow on the drivers side door will tell you what your payload is. Take the weight of all the gear in the truck people bags etc then subtract it from the GVW that is what is left for tongue weight. With the 2.7 EB you will be fine. Here is a really good forum for trailing with a F150...

Which V6 engine do you have along with what gears? I have towed an enclosed trailer with a Shelby inside and some other stuff weighting in at ~9K. I towed it from OH to TN though WV. I had no problem with the 3.5 eco boost. I towed an old Ford Industrial (8000 I think) from Bremerton WA to...

I think that is what happened, the last time I put it on I was in a hurry. Funny thing is it didn't leak until a few weeks later when it got colder. I will watch it to see if it leaks again. Thanks

The last time I put the loader on I must not have got it seated all the way. I took off the quick disconnect reseated it, and the leak is gone.

Thanks I got the leak fixed. I cleaned the belt with soap and water and it is drying now. I will reinstall it tomorrow.

Howdy. My quick disconnect has a leak on the last port closest to the seat. It has dripped down onto my mower deck into the spindle area for the drive belt. I will get to it today and fix the leak, but will I need to replace the mower belt? Or will it dry out after a few thousand spins?

Check to make sure your HST is in Fast or Slow along with 4wd (if equipped) is in gear. If it is like the BX2380 HST you should have a Turtle and a Rabbit. It has to be in one or the other not in-between.

I was looking into this before I got a Cyclon Rake for my zero turn. Terra King. Not sure if it will work on yours.

I can't take the key with me, because my wife uses the tractor also. She was going to cut the grass, but he got to it first. I don't loan tools, trucks, tractors, wife, cars, etc. He was just trying to help out knowing I was out of town. The tractor stays in my garage while I am out of town...

I was out of town for the last month for work. My cousin decided he would mow my yard for me. He called and asked how to use my BX with MMM. I told him not to worry about it I will get it done when I get home. He decided to do it anyway. He has never operated a tractor before, so he just...

I have a BX2380 with a MMM. I bought the drive over deck because I wanted to take it off and put it on when needed. I find it to be a real pain to take off and put on. I have a smooth garage floor so it just slides around. I have a lot of woods in the area I am working right now, and the...

I pulled 4500kg behind my F150. and around 2700kg behind a Jeep JK Wrangler. There is no need for a different license. Behind my F250 I can tow 8000kg. When you start pulling up in the range you are asking about you will need a CDL. They also have classes with in them. Here is a pretty...

Maybe try it back words and see it will fit better.

Move the arm to the left or right and drop the back hoe boom to the deck. Run chain across the bucket from side to side of the trailer.

I use a 25 gallon sprayer I bought from Rural King to do the same thing. I have mine in the back of my Side Kick. I just put a boom sprayer on it so I can spray weed and feed etc on my lawn.