Search results

I will be out of town until the 1st of Oct so the spa day and oil change might be late. When I get home I plan on given it a bath a bit of grease and an oil change. I will look at the PM schedule to see what else it might need. I was thinking I might give it a beer just cause but is that...

Well two years of me buying it brand new and shiny off the lot. Now I have 150 or so hours on it and it is dented and dirty most of the time. I received a survey from Kubota about how I liked it so far. I replied with change the hood latch and get rid of the drive over mower. The drive over...

I find on my BX2380 steering wheel needs to be straight. Also if it is hard to go into gear I roll forward or back a bit to get it into gear. When I pull it out of gear I slow to almost a stop and give it a tug most of the time it pops right out when I stop it drops into 2wd. Turtle speed is...

Is the tractor going to be kept inside or outside? Do you have a spot to lock the tools? A good 16 OZ hammer Adjustable wrenches 2 large 2 smaller Straight slot screw drivers Philips Screw drivers Spray lube Grease gun Lock and Lube works great Pliers Side cutters A small open end wrench set...

The 16HP riding mower may not be well off on a slope. Depending on type of engine it has. If there is no sump pump (like on most gas lawn mower engines) it will depend on the rod and crank to sling the oil around. Then you may be causing engine wear faster than normal.

Which leaf vac do you have? I was under the impression zero turns had a hard time pulling things like carts and leaf vac's. How does it do pulling it?

Howdy all. I am in need of a new lawn mower. I have a 200X Cub Cadet RZT 50 (zero turn) and a 201X JD L135. I want one good mower that does not require me to work on it before I use it. I like the zero turn and was looking at the Kubota's to replace them. I am wanting to know if I get the...

Nope type of trailer does not make a difference. Take a look at this story video. Weigh Safe

Look at the sticker on the side of the drivers door. It will tell you how much weight you can have total for your truck. This weight will include passengers, fuel, any accessories plus tongue weight. Take that weight and subtract passenger weights fuel any accessories and that will be the...

Here is a short video about the HST peddle. As stated above it works backwards from a car.HST Messicks

I have a BX2380 so a little different then yours. I take mine off in my garage all the time. I have an old piece of outdoor carpet I place it on. I wouldn't worry about putting yours down on the asphalt, you could place a few pieces of 2 by under it (as stated above) if you are worried...

Nice you made it to second grade welding, a lot further then I got. I welded a deck wheel on a neighbors BX1880, lets say it is still stuck on there after three weeks. I also welded my Cub RZT after hitting a very large and heavy rock. It is about 1st grade work. I like the looks of the...

He said it is under his house.

So it is a public easement, if so I would let who ever has the rights to that easement take care of it. I had one on my propriety at my last house. I let the city take care of it. They would mow and fix the path when needed. I figure it this way if the city / county want a path there they...

See I learned something today already. https://bxtractorparts.com/shop/ols/all?sortOption=descend_by_created_at Is the URL.

I have a BX2380 I bought two years ago. Last year I noticed my tie rod end boots where ripped. So I ordered the Boda Products kit to replace them. Shortly there after a tree fell on my garage, and well my focused changed from fixing the tractor to fixing my house. The other day I was using...

A few questions How long and wide is the area? What is already there? You say a 5 or 6 foot slope, in how log a distance? As stated above you might need a retaining wall etc. A tractor will get the job done no problem. Terms Fill dirt Gravel Retaining wall ie Rocks, rail road ties, block...

I am not sure of the B7200 but on my BX there are two nuts under it to adjust it. Set the top one and snug the bottom one to the top so it will not back off.

I will add, I do mine in my garage. I put a carpet on the floor and drop it on it. I did it in the yard once and it wasn't level. Made it a pain to put back on. So keep it as level as possible drop it curl it and disconnect it. After you do it once or twice it is really pretty easy.

Not my tractor but a Mini Ex I rented for the weekend. I figure my tractor will be a little lighter in the trailer.