Search results

Woods build good equipment, I have 2 Woods heavy duty brush cutters and a large box blade, manuals are available online, spares are easy to get. 6’ is a good fit for your L2501

You will get used to your new L2501 real quick and will appreciate its capabilities, it is a Good all around machine

I have both a 5’ and 6’ wide snow pusher. I use the 5’ wide on my L3901 and 6’ wide on my larger MX 5800. I think you will be much happier with a 5’ on your L2501. Both of mine are from Express Steel, you can buy direct or through eBay. They are well made with a rubber edge. Snow pushing is my...

I fitted the telescopic stabilizing bars on my L3200 and L3901, best modification possible for the tractors. They Are a must have, makes hitching up so much easier.

Carhartt quilt lined bibs & jacket, also think about what you wear underneath, I find a few light layers help too and keep the bulk down. Congrats on the 74.

I don't use dye but just have someone watch the sight glass as I add UDT2 when changing hydraulic fluid or filters, if you add fluid at a reasonable rate the person watching the sight glass will clearly see the fluid and help you get the right level. I tried it on my own the first time and...

I agree with Henro, it's pretty basic stuff to change all of your fluids just follow the directions in the operators manual. I would change all of the fluids and filters so you have a good starting base line for the tractor going forward. Remember to change the front axle fluid too. Good luck...

I run a heavy root grapple on my MX5800 and a track loader. I've often thought about a lighter grapple for my L3901 and looked at Everything Attachments 55" Wicked Root Grapple, it's well reviewed and is light leaving your loader with a lot of lifting capacity, this is important on smaller...

My dealer supplied the parts & installed 2 rear remotes on my L3901 for a cost of $1,375, 2 years ago, it was at the time of purchase of the tractor new, in addition they fitted 3rd function on loader for use with a grapple.

I use a 5’ on my L3901 and 6’ on my MX5800, based on the data for your tractor I would think a 4’ width would be more suited, data I found suggests your track width to be 40” so 4’ wide pusher will work well. Both of mine are from Express Steel Inc, nice heavy duty units with serviceable skids...

OEM 5-01-121-03 Oil Filter L1801, L2201, L1500, L1501

I 'd recommend one of these: https://www.palletforks.com/3-point/ballast-box/ballast-box-3-point-category-1-tractor-attachment/191431.html I fill mine with bags of pea gravel, nice compact size and I find it works well with my larger tractors but I'm also running loaded rear tires on my larger...

I'm with armylifer on this and would suggest that you only buy the tractor with a FEL included (even if it is a new unit from the dealer). You have already stated that you want a FEL, now is the time to negotiate it in the deal and not incur additional "fitting fees etc." later. Then you will...

Most important thing is you are taking the time to adjust the clutch. I had an old woods heavy duty brush cutter with slip clutch and let it go for several years without adjustment, my son was mowing a clearing and went off in the rough with it, the slip clutch did not do what it should have and...

I have the cross member and loop but still use a bungee cord anyway, stops me dropping it down when I run out of hands.

Chin, Thanks for that clarification. Things get more confusing as you move into receiver apature sizing, again I always fit a 2” hitch on a car or SUV regardless of towing capacity, it’s about just having a common size for convenience. I do make sure I understand the towing vehicles capacity. I...

Nice modification. I changed every 1 7/8” trailer or attachment I own to 2”, never understood why there is no common standard,

Danmorea, Those forks look ideal for your loader, width adjustable and with a headache rack, you will amazed at just how much you use them. I recommend a couple of 6' straps, 2" wide (harbor freight or amazon) and a couple of heavy clevis shackles 3/4 / 7/8" pin, they will help you lift any...

Your loader capacity either at the pin or 500mm out is well under 2,000 lbs, I assume it is a la534 loader. You need to buy light forks as you have to deduct the fork weight from the loader capacity, my only advice would be make sure you can adjust the fork width as you will do this often and if...

I use a rear snow blower without a cab, I know many users do too. It’s not perfect but it clears my yard and driveway real fast and leaves no snow piles anywhere.