Search results

Yesterday, I bought a middle buster plow. The plan is to dig potatoes the next couple of days.

I use Outlook with my Internet Service Provider. I can set up a rule to move emails (via sender, subject, etc.) to a designated folder. Another option is an automatic rule to permanently delete; same result as emptying the Recycle Bin.

I use Power Service for gelling, Pri-D for microbes. Also use Pri-D to help store kerosene.

I used a sealer, probably the same as below 3 days after the concrete was poured. I read that using a sealer traps water in the concrete longer making it possible to achieve >100% strength over the course of a month...

I'd like to try this someday https://www.dailymail.co.uk/video/news/video-1319485/Feral-hogs-hunted-blow-tannerite.html?page=

The below statement is true. The above statement is false.

He's even leaning the wrong way, lol

How big of a job would it be to remove the EGR and clean it out? This might be another option...

I've got an L3901 with a 5' Land Pride rotary cutter. If I had it to do over again, I would have gotten the 6' cutter. I have come close to overloading the bush hog in tall grass, but never lost RPM.

If anyone is interested in a good prepper site, do a search for "Frugals Forums". Set up an account. It will be a limited account for a while, but you should be able to search and read preparedness topics.

My guess is that you put too much oil in the system. Oil can stay in the evap as well as the condenser. Should have just added 1 oz, since that was the only oil removed. The oil forms an insulating later between the refrigerant and the heat exchanger tubes. That would explain the elevated high...

The only saw I have a problem with is my Stihl MS180C. The only carb adjustment is for idle speed. No anti tampering plugs, just no adjustment for high and low speed. I asked a guy at a Stihl dealer if an adjustable carb was available. He mentioned something about going to jail if he told me. I...

CCI mini mags, .22LR 36 grain hollow points take care of the issue nicely.

For algae in diesel fuel and kerosene, I use Pri-D.

It was always nice to look at their stuff and buy it cheaper elsewhere.

So far, we have sent 13 to groundhog h*ll.

Here is an article from a left leaning source that was in my Google feed. It says lots about why global prices are high, but that wasn't the main point of the article. https://truthout.org/articles/70000-acres-of-federal-land-were-just-handed-to-the-fossil-fuel-sector/?amp

I use sea foam in all the gas I use in small equipment. I use 87 octane gas for lawnmower and 89 octane for the Stihl 2 cycle equipment; 2 blowers, 2 trimmers, and 3 chainsaws. 1 oz/gal sea foam for mower and 2 oz/gal sea foam for the 2 cycle engines. I don't have many starting or fouling issues...

Same here in this part of Indiana.

Are you Ham Operators on "Frugals"? I know they have events a couple times per year.