Search results

If you are set upon buying this way, the seller will tell you how to make the transaction. I would expect that the seller will require a wire transfer. SDT

Anyone know if adding a mid PTO to a GL6060 ROPS requires a split? Cannot seem to get a straight answer from my dealer. SDT

Not a chance. Much too large and heavy. Nothing larger than a rather light weight 6' and that will be too big in some conditions. SDT

A rough ride comes with small tires and a short wheelbase. That said, removing the FEL will help a bit as would reducing the pressure in the tires and removing the liquid ballast. Tradeoffs. SDT

Financing interest rates offered by manufacturers are a function of borrowing costs, e.g., prime rate, etc., and economic conditions. Kubota and many other manufacturers have long offered 0% financing recently but interest rates are rising and I expect such financing rates will soon be a thing...

Sorry. Didn't see your post immediately above. SDT

Verify that the engine stop knob is fully seated in the run position. SDT

I once sold a NH tractor to a buyer 1,500+ miles away. Buyer financed it and loan company sent representative to verify condition, serial numbers, etc. Funds were wired to my bank before pick up. Buyer arranged pick up. That said, I would, I would never buy anything this way. SDT

Bingo, JAP. Kubota is in the business of selling tractors. 0% is how it's done. That said, 0% is not going to be around indefinitely. Stay tuned. SDT

It's just about impossible to compete with 0% for 6 or 7 years. SDT

Sounds like classic HP limited. You're asking too much. SDT

I use compressed air from the inside , then outside then inside again. MUCH higher than 30 PSI. Dean

Sounds to me like one or both rear wheel was sliding. Not uncommon. FEL equipped? FWA engaged? SDT

Get as much HP as you can. Snow blowers suck HP like a Hoover sucks dirt. SDT

The first service is very important. That's when the manufacturing debris is removed by changing the filters and lubricants (Yes, I change the hydraulic oil also, regardless of the schedule in the owners manual). I recently performed the 50 hour service on my M9960. The twin hydraulic filters...

You need a new dealer. SDT

Hydraulic connection dust plugs come in different sizes. Your dealer should have various sizes and colors or should be able to get them. I had a very difficult time finding suitable female caps for the hydraulic angle/third function hoses for my B3350 as the ones called for in the Kubota parts...

I, too, fill all of my tractors, both gasoline and diesel, from cans. The gasoline powered Fords are easy, requiring only an old style tractor funnel. The Kubotas are a different matter. I use an old style 2 Qt. galvanized steel Plews spout container for the little ones. Works well and...

Bingo. I did that to all of mine about 10 years ago. Of course such nonsense would not be necessary but for the nanny state. Dean

I would like to replace the steel cutting edge on my Kubota V 5060, 60" snow plow with a hard rubber or poly cutting edge . This plow is used on my Kubota RTVX-1100C. Kubota does not offer a rubber or poly cutting edge for this plow. The OEM edge is 1/4" flat steel 72" long X 6" wide and is...