Search results

Keep in mind that a 6' cutter is 20% larger than a 5' cutter. I would consider this something more than "slightly larger." SDT

It depends upon what you plan to cut, how fast you expect to cut it and how often you expect to cut it, but I would not even consider it. I use a Woods BB720X HD 6' cutter with my 53 PTO HP L6060 and it's often all it wants, even on level ground. I use a Woods BB840X HD 7' cutter on my 90 PTO...

I didn't understand your reasoning in the 5th paragraph but, there is no performance "disadvantage" to a gear type transmission vis a vis a HST. Indeed, the HST suffers the performance disadvantage. HST transmissions provide infinitely variable speed but do so at a cost. HST transmissions are...

I have never seen one of those stripped out. One wonders how it happened. Nice work on your work around. SDT

Just came from my local Auto Zone. They have no such deal. That said, Orschlein (SP?) has 5 gallon pails of Mobil Delvac 15W40 diesel spec for $24.95 after $35.00 rebate. Surprisingly, you can get up to 5 or 6 (can't remember) $35.00 rebates. I only bought one as I already have more oil and...

I researched both 60" and 72" MMMs when I bought my B3350 but bought neither at this time. May do so in the future. I much prefer the design of the 72" mower to the 60" but it does cost more, requires more power, and is more likely to scalp. I'll continue to mow my lawn with my B1750 HSDT...

Most likely. Both 60" and 72" MMMs are offered for the 2650. Chose according to the ground to be mowed, e.g., obstacles, terrain, etc. If your ground is not flat, the 72" mower will be more likely to scalp. SDT

Sounds like the right thing to do. I'm sure that your dad will be pleased. SDT

Some engines are "OK" with some amount of properly administered ether. Some engines are not OK with just about any amount of ether improperly administered. Broken ring lands, rings, etc., are the common causes of ether addiction. A much better procedure is a gasoline soaked rag carefully...

The tail wheel is a caster wheel. It sounds like you have backed into something bending the tail wheel spindle. Inspect the tail wheel spindle and fork for evidence of damage. If there is insufficient caster, the tail wheel will do exactly as you describe. SDT

Turf tires are better than R-4s (or R-1s) in snow. Turfs with chains are best. Nothing wrong with using turning brakes with a HST. SDT

Sorry. Can't use a cab tractor for most of the work that I do with my L6060. SDT

Nothing, other than decide to not buy the used (but unused) snow blower that my dealer has on consignment. That said, I probably would not have bought it anyway but for other reasons. SDT

Starting fluid is highly addictive. I never touch the stuff. Dean

Kubota skid steer. SDT

Yes. My new B3350 was delivered 05/18/2018. No issues. See my response to your inquiry on TBN linked below. https://www.tractorbynet.com/forums/kubota-owning-operating/400958-b3350-regen-any-updated-knowledge.html SDT

No. Pulling a 2X14 moldboard plow will require close to 30 PTO HP and over 20 drawbar HP in good ground and much more of both in many grounds. The tractor will also need to be properly set up for plowing, e.g., AG tires, ballast, etc. Not sure what you plan to do but a rototiller may well be a...

Have your dealer give you the owners manual and follow the instructions therein. SDT

Thank you. Note: Again not certain but it may be that the necessary internal gear is standard on cab models but not ROPS models. If so, a split may be necessary on ROPS models but not cab models. SDT