Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
Good pointNot sure how fast your bath is working, but you might want to flip your part more often than every 24 hrs to avoid getting a line where the water line is. My theory is from using a similar method to electrolytically sharpen fine wires by dipping them in and out of the air solution interface with the power on. Same for applying a silver chloride coating. You could see it working, bubbling right at the interface, more than deeper in the beaker. Could be an artifact of the shape of our parts, wire, but just in case.