What did you do to or on your Kubota today?

[Trimley]

Is that a Durafit seat cover? Love mine!

Yup

 

[SteveBX23]

This photo op looked better to the eye than it did after the pic. On site this morning for some brush hogging

 

[The Evil Twin]

Got a little work to do in the next couple days. The guy from the paving company said to NOT use kero. He said hose it down with water and let the sun do the work. Compact it at the high temp for the day (2-4 pm here) and then repeat the next day.
Yet again, I think I underestimated how much I need. 70 tons may not be enough.

 

[dirtydeed]

Got a little work to do in the next couple days. The guy from the paving company said to NOT use kero. He said hose it down with water and let the sun do the work. Compact it at the high temp for the day (2-4 pm here) and then repeat the next day.
Yet again, I think I underestimated how much I need. 70 tons may not be enough.
View attachment 109477

those are some really nice millings you got there.

You can use one of these to get you close.... https://www.nesl.com/product-calculator/

basically, a yard will cover about 100 sqft to a depth of 3". Millings run slightly under 1.5 ton/cu yard.

 

[Fordtech86]

Got a little work to do in the next couple days. The guy from the paving company said to NOT use kero. He said hose it down with water and let the sun do the work. Compact it at the high temp for the day (2-4 pm here) and then repeat the next day.
Yet again, I think I underestimated how much I need. 70 tons may not be enough.
View attachment 109477

race track in the front yard I like it!

 

[fried1765]

Got a little work to do in the next couple days. The guy from the paving company said to NOT use kero. He said hose it down with water and let the sun do the work. Compact it at the high temp for the day (2-4 pm here) and then repeat the next day.
Yet again, I think I underestimated how much I need. 70 tons may not be enough.
View attachment 109477

You will be VERY happy with the end result!

 

[The Evil Twin]

those are some really nice millings you got there.

You can use one of these to get you close.... https://www.nesl.com/product-calculator/

basically, a yard will cover about 100 sqft to a depth of 3". Millings run slightly under 1.5 ton/cu yard.

Well, there is my mistake. I guesstimated 1.2 tons per yard. Then, there is the fact that a full load could be 18-22 tons in a 3 axle truck. At least the company is close by.

 

[The Evil Twin]

race track in the front yard I like it!

That's in the back yard! Lol

 

[The Evil Twin]

You will be VERY happy with the end result!

I'm hoping so! Renting the biggest drum roller they have. The truck/ trailer combo is 22k so I need it packed tight!

 

[Siesta Sundance]

Correction:
We need to find the formulation AND the maker!

 

[fried1765]

Interesting.... but.... does not actually recommend/suggest any specific brands or substitutes for Kubota SUDT-2!

 

[Siesta Sundance]

Interesting.... but.... does not actually recommend/suggest any specific brands or substitutes for Kubota SUDT-2!

I asked the dealer about me using the ISO 68 in the SVL75-2 for our summers/Texas heat they said didn't recommend, but half those guys are HS drop outs, anyways. Kubota manufacturing says to use the 68 for summer, that's probably what I'll end up using.

I run Shell Rotella hydraulic fluid in the MX52 for the past 400 to 500+ hours. The MX I think is at 740hrs, 340hrs on that Hyd oil and it still looks new. I change the hyd/eng filters(Kubota brand) every 200hrs it's a dusty hot mofo down here.
ERVERY 10hours on the machines, the zerks get greased, the air filters and radiators get blown out and cleaned.

 

[billrigsby]

Boy that is purty, even blue, won't be for long.

Pretty fast delivery!

 

[hoot owl]

I loaded my 2501 on the new,

today 22' trailer. I will be mowing the bee yards tomorrow. (My BIRTHDAY)

 

[GrizBota]

I finally finished up mounting the Kolpin gear basket to the back of my L3830.

Here’s a write up I did on it.
Storage On A Tractor - Kolpin Gear Basket 53360

 

[In Utopia]

I asked the dealer about me using the ISO 68 in the SVL75-2 for our summers/Texas heat they said didn't recommend, but half those guys are HS drop outs, anyways. Kubota manufacturing says to use the 68 for summer, that's probably what I'll end up using.

I run Shell Rotella hydraulic fluid in the MX52 for the past 400 to 500+ hours. The MX I think is at 740hrs, 340hrs on that Hyd oil and it still looks new. I change the hyd/eng filters(Kubota brand) every 200hrs it's a dusty hot mofo down here.
ERVERY 10hours on the machines, the zerks get greased, the air filters and radiators get blown out and cleaned.

I believe he's right. When it's hot like it is here my float function quits working. Last Jan. I thought my control valve wasn't working, it just quit when I was working the little L175 pretty hard using the float to level off a pad I was building. Later that day when it cooled down it started working again.
A few weeks ago while trying to back drag some caliche it quit working after about the second 20ft. drag.
Come on rain and cooler weather. 30+ days of 100+deg. and no rain.........that's Texas.

 

[DustyRusty]

I refer to Houston, as The Big Ugly!

Isn't Houston where Ima Hogg was from?

 

[DustyRusty]

View attachment 109476

This photo op looked better to the eye than it did after the pic. On site this morning for some brush hogging

Always take pictures with the sun to your back and they will always come out nicely.

 

[S-G-R]

Finished planting the blue spruce with the LX3310/PD25.

 

[GrizBota]

Finished planting the blue spruce with the LX3310/PD25.
View attachment 109604
View attachment 109605
View attachment 109606

That will provide a nice screen in a handful of years. Looks good.

Myself, although I like the look, I do not enjoy the feel of blue spruce, such as might be the case when mowing around them while they are to small to prune to allow driving under.