Sawmilling

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,618
3,446
113
SW Pa
Good to have kids to help the old man,,lol,, does he travel too?
 

kkk

Banned

Equipment
rtv900 /u15 ex/WP 955/woodmizer LT15
Apr 10, 2020
47
7
8
OreGun, BLM
Got a LT 15 last year and pretty much have it dialed in & ready.
Need a bigger machine for log moving etc. And need to build a proper saw shed so I can load mill from the side. In its current location I can only end load it which is a bit of a pita. Glad to see theres a few Sawmill guys here.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,785
896
113
New Hampshire
Nice thread and pictures Majicman. I have built a lot of buildings with rough sawn, full dimension lumber. Great to work with contrary to what many people think. People have become too soft nowadays to work with rough sawn lumber. They expect each piece to be exactly perfect with the next one and don’t want to hurt their hands with splinters. Around here, there are lots of houses and barns built with rough sawn lumber going back 100-200 years that will probably outstand many modern built homes. About 4 years ago I had a guy come in and saw out 4,400 bf of hemlock I cut to build my new maple sugar house. It was a lot of fun helping and my sugar house came out great.
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
I suppose that your "sugaring" is about done for this year?

I'll begin sawing a Red Oak job for kitchen cabinets, etc. tomorrow.
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
Whackin'-n-stackin' Red Oak 1X4's for kitchen, etc.cabinets. Then some ratty/knotty 2X6 framing lumber. I also sawed 1X6's and 2X4's today.
 

Creature Meadow

Well-known member
Lifetime Member

Equipment
2012 L4600, Disk, Brush Hog, GB60 Garden Bedder, GSS72 Grading Scraper
Sep 19, 2016
1,064
135
63
54
Central North Carolina
See, you need a guy with a sawmill to saw you a whack of lumber. ;)

Seriously I probably could put you in touch with a nearby sawyer if you need one.
Magicman thank you but a guy that goes to my church has a mill.

Long as we provide the wood he mills what we need at no cost. He is retired and loves to mill and help people.

I carry him the logs and provide the cut sheet, he does the rest.

I do pay him but it is hard too, he is stubborn.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,785
896
113
New Hampshire
I suppose that your "sugaring" is about done for this year?

I'll begin sawing a Red Oak job for kitchen cabinets, etc. tomorrow.
Yes sugaring is done. Finished about 10 days ago.
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
Some huge Red Oak logs today. 39" butt and my sawmill is rated for 36". :eek: Guess that I could ask if that butt log makes my sawmill look little? ;)

Mostly 1X4's today.
 

Attachments

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
I sawed a bit of beetle killed Pine today. 14 logs and a nice whack of mostly 2X4's & 1X12's.

What I sawed today is in the center. I had previously sawn the lumber stacked on either side
 

Attachments

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
I sawed some very interesting (to me anyway) pieces this past Friday.
IMG_7694.JPG

Bookmatched Cherry.
IMG_7695.JPG

Another example of bookmatched Cherry.
IMG_7677.JPG

2"X20"X8' bookmatched Tulip Poplar.
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
1592068463572.png

This is what the logs looked like when I arrived. Three Red Oak logs.
1592068574927.png

Looks can be deceiving because the butt log was 40" diameter.
1592068676653.png

1651 board feet of 4/4 and 9/4 lumber for various projects. The customer was happy. :)
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
I finished sawing a framing lumber job today.
IMG_8028.JPG

3661 board feet of 2X4's and 2X6's that will be used to build a camp cabin similar to this: Camp Build
IMG_8010.JPG

The trees were removed when the customer built his lake.
 
  • Like
Reactions: 1 users

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
We did a bit of salvage/sawing yesterday. This was a whack of Cedar logs that had been abandoned and needed to be handled.
IMG_8039.JPG

Saw the good and push the bad into a burn pile.
IMG_8041.JPG

The first 9' logs are ready to saw. I see a couple that had center rot are were discarded.
IMG_8046.JPG

I'll deliver this to a customer Monday morning.
 

Magicman

Well-known member
Lifetime Member

Equipment
M4900 Utility Special 4WD e/w FEL & 1530 John Deere "Traveling Man"
Oct 8, 2019
5,538
7,680
113
81
Brookhaven, MS
knotholesawmill.com
I looked at these Red Oak logs yesterday.
IMG_8061.JPG

They have been laying there about a year which will not affect the heartwood.
IMG_8063.JPG

Next week will be busy for this old boy!! :oops:
 
  • Like
Reactions: 1 user