Search results

Ditto on poor battery cable or bad battery cable connection.

Both manual & hyd controlled shuttle(reverser) have control lever on LH side of steering wheel. If manual controlled shuttle does traction clutch foot pedal have free travel?

I suggest to check reverser fwd clutch pressure. Also check reverser linkage to be sure it's fully shifting control valve. If your M9000 drivetrain system is similar to my M7040 the dry damper clutch remains engaged 100% of the time & if it slipped I think there would be low or no hyd pressure...

My Kubota tractor isn't on your list. My Kubota tractor is a '11 M7040

I suggest to check/clean/tighten all 4 battery cable connections

My guess from viewing M108X parts catalog is that engine speed(rpm's) is electronically controlled because I located no mechanical governor in PC

Do any fault codes appear on instrument panel? I'll guess common-rail electrical problem.

Sounds as if hyd valve that's controlled by foot pedal isn't opening fully therefore keeping pressure applied to shuttle clutch plates

Check to be sure ALL wheel mounting bolts are tight.

Many yrs ago I owned a M4900 that had fuel supply problems. Local Kubota service manager advised me to check to determine if tiny screen in fuel shut-off valve in water separator was clogged. I found screen clogged. I cleaned screen & engine began operating correctly.

I think I'd replace springs with new springs when replacing new linings

But he can be easily found on Tractorbynet

Does your M5-111 have hyd reverser? If so clutch pedal controls a hyd valve. It's my WAG that hyd reverser is the component that is failing. I would think hyd shuttle would be located in clutch housing or very front of transmission case. Hyd shuttle clutch assembly is $2385 from Messicks so if...

Many yrs ago I owned a M4900 that engine operated similar to what you describe. I finally located a tiny screen on fuel shut-off valve in water separator housing that was clogged. Cleaned screen & then engine operated fine

Yrs ago I added an adjustable flow control valve to boom circuit on loader on my Kubota M4900. The flow control valve eased operation while handling 4X5+ rd bales that weighed 900-1000#s

Back yard or front yard repair I've had cornhead grease in my JD 709 rotary mower that has a faulty blade shaft seal for several years. While operating cutter cornhead greases liquifies some & when machine sits it solidifies. Cornhead grease has been used for over 40 yrs so it has it's value.

It appears that Dave has your question answered about brake pedal switch.

My "crystal ball" is cloudy it would help if you would reveal your tractors model so you could receive correct part # for your tractors brake light switch.

I agree with other posters never add refrigerants without monitoring both high & low pressures with gauges.

As we're well aware of incorrect information especially if posted on the internet isn't a good thing!!