Search results

I've done it to mine a few years back, I couldn't get the hang of the backhoe pattern. I swapped the hoses at first. It changed the functions but wasn't smooth. I had to go back and swap the restricters to go with the original hoses/cylinders. Not sure if that's the right term for them, the...

That's great that you got the shaft fixed but where's the pictures? As far as no flow, my first thought was low oil.

Bring your L39 to my place. You can try to hook up mine. Then we would both know! Lol You might be able to compare dimensions of the mounting bracket. Widths and pin to pin dimensions. Easier to check when it gets warmer again. Does the L39 have 3 hydraulic hoses to run it? The L48 does, 2...

https://www.orangetractortalks.com/forums/showthread.php?t=39772 I posted pics of the adjustment procedure in this thread. Scroll down to post #11. Good luck. I hope it helps

Does it only happen in high gear? Forward and reverse should be the same speed. If it happens in all ranges, I'd think the linkage is out of adjustment. Welcome to the forum!

At first reading this, I was thinking the lift cylinders just had air in them. Cycle them a few times to bleed them and it should be fine. But then you said that they were fully retracted and no more rod showing. I'm not that familiar with a removable loader (my L48 is fixed). Is it possible...

I've had it happen on trailer tires before. Was told they were over loaded or over speed. Relocating from Ontario to Nova Scotia cost me a few tires. Mind you it was probably 5-6 trips over two years, and 110km speed limit warmed them up a little! As far as yours, like flip said probably...

It's probably not a good idea to boost the pressure to find the leak, it could end up causing more somewhere else. I believe most tractors have more than one hydraulic pump, which means multiple circuits. My L48 for example has 3, I'm not sure what yours would have but I'd assume 2. You may need...

Yes they are. Over here they are generally called flail mowers. Also available with different style 'flails' or 'hammers'

Most of the province is without power. I'm guessing certain internet providers would require power also. Just guessing Hopefully he made out ok last night.

From what I see in the picture,. I'd install 90' elbows just after the quick disconnects on the grapple side. It should keep them further from harm's way.

Bearbait, hold on to something solid. Im down on the South shore and in the brunt of it. Luckly we're on the west side of the eye, so lighter wind (relatively speaking) but heavy rain. I believe you're forcasted to get the east side of Dorian. Which will be lighter rains but higher winds. So...

If you were only closer. That's a great deal

It might depend on countries, states, or provinces? When I bought mine, well used. There was no title. I was told the original dealer should have filed it with the ministry. The original owner never used it on the road (I find that hard to believe for a landscaping company) Because I was going...

I'm with you on that one! Up here A&W have a plant based burger. Tim Hortons has a plant based breakfast sausage sandwich. Haven't tried them, nore will I. I rather my veggies pass thru and add muscle and natural flavour to the critters that I eat. If being vegetarian is so good, what do...

How about a combination of the two options. If the B6100 sub frame is only short in 1 or 2 areas. Take your wooden set up with you to a local welder. They should be able to stretch your steel frame to the lengths of your wooden one.

Makes me wonder how small of a set a blades you could find for a brush hog. The heavy ones that are hinged, for large stationary objects. Or with your Fab skills, possibly make your own. I'd be nervous of not getting strong enough hinge pins. I could see with every pass deeper in the ditch, the...

That's good work right there! Simple enough for repairs down the road also. Can you post a link to the video? I tried searching utube for diy ditch mowers, there is a ton of them, a bunch just look like an accident waiting to happen!

Looking for something like this? https://weberlane.com/wp-content/uploads/2015/04/WL2TS.png No idea on price but I've heard they have a good name. There are a few videos on YouTube with similar trailers.

Since you've tried different blades already, I'm sure this would apply to you but... ...I'm not implying anything but I wouldn't bring it up if I didn't see it for myself. Are the blades on the right way up? A neighbor brought his husky rider to me to 'sharpen' the blades. He said he hit a...