Search results

You don't have to rethread to metric specs, just measure the hole, re drill, tap to the next size up pipe thread fitting. This is hind sight, but If I had a new tractor, I would let the dealer do the first service, due to situations, like this. That way they cant accuse YOU of overtorqueing...

But then, they would have to jump start it a lot, cause it won't charge battery in the off position...:D:D

Welcome to the forum, first. Is this your first diesel? Many diesels don't shut off, with the key, particularly the older ones. Turning the key off only turns off the charging system, and the hour meter. I'm not familiar with your tractor, but I think its new enough, that it should stop with...

It doesn't take much HP, to turn an augur. The first ones were farm built, usually out of an old car or truck rear. If a ford 2n can drive one, with about 20 HP, most any kubota can run one. In my experience, I have never run across a gear drive digger, that has reverse... Almost all slm...

Just saw this one posted on somd free section of craig's list, tonight... http://smd.craigslist.org/zip/5701670657.html :D:D

Longer line=delay in timing. Thats why sometimes you see 2 or 3 extra loops, in a line...:D:D

Know any kids? Most of the time they want the fastest, and the bestest. Bet you can find an old apple, pretty cheap. I've done that with craigs list a coupla times...:D:D

First place it should be removed from is congress, and the white house...:D:D

If you search this site, there are quite a few articles in the appropriate section...:D:D

Thank you for NOT posting pics of the second job...:D:D

If it was me, I'd find the canopy, first, then build a frame for it. Golf carts seem the most economical, so I'd start there, but that's just me...:D:D

Easier to observe what the spurt looks like, if you remove the lines, on top of the inj pump...:D:D

I'm partial to the ryobi stuff, old and new batteries are cheap, available, and interchangeable, they make tons of tools, and like me, they're cheap. The handheld grinder is one of my favorites, a battery will sharpen 2 BH blades, still on the machine, put a cutting disc on it, and you can cut...

You shoulda taken smaller bites ( punch line to an old joke..) The pipe wrench should back it out, prying it out likely will damage or bend something. Take the pin out of the auger, lift the head, move tractor out of the way, then unscrew with BFpipe wrench. Its been about 15-20 years since I...

Likely only 1 shank... Depends on soil type, and depth you are cutting...:D:D

looks kinda like a predecessor to a worthington golf course tractor...:D:D

Position should be the tiller sheet metal sitting level, when in the ground, working. I agree with NIW, you need to find a manual for the tiller, it should have the dope on tightening the clutch...:D:D

https://youtu.be/SDCg7f93R6o https://youtu.be/gd_LchqEO2s :D:D

Here's the youtube link... https://youtu.be/OQ_ZYocytPg :D:D

Never had much luck with the rejuvenator. Best is to take the zerk off, clean out gunk, and spray with Kroil, then re-assemble, and use the lock-n-lube. Sometimes it helps to build a little resevior out of 1/8" pipe, and keep filling with Kroil, sometimes takes a couple months and repeated...