Search results

Cupcakes, campers... http://www.rightthisminute.com/ Link likely will only work for today...:D:D

I thought that, too, looks like a trick of perspective...:D:D

When I do a big job, I just bungee cord a cooler to the weight rack, up front. But then again, I don't have a FEL, to get in the way, on all my old kubotas...:D:D

You may also want to check for debris in the tank, blocking outlet, or a clogged tank vent...:D:D

I prefer a good old fashioned dogpatch foomobile... At least its orange: https://youtu.be/WpUcRYq73YY :D:D

Since you mentioned grease gun, I'll add get a lock-n-lube tip for it. Best $30 bucks you can spend...:D:D

Before taking it to the tire shop, try cleaning the whole tire, then spray the tire with windex, and rotate it, as you spray. If the windex bubbles, you have a leak, there. You might have picked up another leak, in the mean time. At worst, the tire guy will have a clean tire to work on...:D:D

It also will help, to buy a IR laser thermometer, to check for hot spots. I find it invaluable, in finding cooling problems... http://www.harborfreight.com/catalogsearch/result?q=ir+thermometer :D:D

Best advice I can give on the art of growin good taters, is to plant them in fresh plowed, NEW ground. That means away from last years patch, as far as possible. Anytime i have rough ground to grade up, I plow it, and plant taters in it, for a season. After harvest it grades out pretty good...

if the bucket is bent, sometimes you can spot it, by taking it off, and laying it on a known flat slab. If it wobbles, like a table with a short leg, you have a clue...:D:D

Welcome to the algore gas can revolution... I still use old chilton type cans, with a vent, they came in red, blue or yellow, and had a vent, that actually allows one to do what one intends them for, pouring fuel, with no spills...:D:D

A Connecticut soft drink company is hoping to add a little pop to this year's presidential election by releasing two specialty sodas named for the presumptive nominees. Avery's Beverages, a 112-year-old soda maker in New Britain, is offering Trump Tonic and Hillary Hooch -- named, of course...

It doesn't happen often, but sometimes, the overflow tank, or its hose can have a small crack or leak in it. As it is not pressurized, it usually is not a big leak. Sometimes its a crack, from vibration, that just seeps out...:D:D

Most of the rotary cutters I have had spring a leak, its been the lower seal, under the deck. I usually drill in a fitting and just fill the lower bearing area with grease, then about 7-8 pumps, when I start them up, in the spring. I still add oil, if it needs it, usually not very much. Never...

Got a picture of the problem??

Definitely, don't use too long a line. Can also put adverse wear, on the centrifugal clutch...:D:D

Hi Sue, Just another note from your bottom dwelling brother. Last week I had a bad day at the office. Before I can tell you what happened to me, I first must bore you with a few technicalities of my job. As you know my office lies at the bottom of the sea. I wear a suit to the office. It's a...

Just gonna sit back and enjoy, maybe find somethin at the flea market, or the auction... http://www.tuckahoesteam.org/ :D:D

If you are a novice at it, you may find buying the complete gearbox and spindle cheaper, and faster than trying to rebuild the one you have...:D:D

Take the steering wheel off, and measure the shaft and key, then spend the next rainy day, at a japanese car junkyard...:D:D