Search results

Interesting, their spec sheet says Amalie Ultra All-Trac 245 meets or exceeds the following specifications:Kubota UDT and Super UDT

Page 119 http://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/&file=WSM%20L210.pdf

If you buy or build a decent 3pt carry-all, you can load it up with sand bags or an IBC or something similar to make a ballast weight, and get the added convenience of the use of a carry-all, instead of a zero use 3pt ballast box, and/or wheel weights.

So if it energizes the starter circuit does it crank and just not fire? Do you have the blade switch/pto switch engaged?

Check first things first, have you tested the battery for voltage? It's possible the key was left on etc. and drained the battery. Have you tried jump starting the tractor off a known good starting battery? (You can also use a screwdriver to jump from the main big terminal on the starter...

If you have the use for one, go for it, twice the breakout force and lift capacity, twice breakout for hoe, portal axles, locked up, if you can bog it and can't get out, you really have made a mess! Just buy it, you'll love the power! Operator/tech manual for those who haven't seen it...

How many acres, how many stumps, what other work will it do, grading, leveling, digging, trenching, brush hogging, carry-all, forks, 4 in one bucket uses, backhoe uses, small tractor with a backhoe to dig, and a 4 in 1 or forks to carry, will it do the job instead of a larger tractor? Emissions...

There could also be connector problems up in the dash area, check to ensure all the main connectors are plugged in and haven't become dislodged.

I don't know your tractor, but generally they have a couple of slow blow fuses or fusible links. Follow the wires from the battery positive and see if there are any connectors/plastic covers etc which are hiding a fuse or fusible link underneath. Alternatively follow the main wire from your...

When/how/why did all the lights go out? When did the alt stop charging? Check main slow blow fuses most likely located near battery

Unfortunately even with a few different proxy servers it doesn't work at my end, so if any user not in the states knows some tricks to get in let me know!

As noted previously, 2 wire stop solenoids should only get power to the "pull in" terminal for short duration. If the pull in is constantly energized then it will burn out. The wires in the harness are generally different, pull in is slightly bigger. General resistance, about half ohm for pull...

Kubotabooks parts manual for B7200HSTD is this yours? http://kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Parts%20Manuals/&file=B7200HSTD.pdf http://www.colemanequip.com/Parts_Detail.asp?partID=606749 http://www.colemanequip.com/Parts_Detail.asp?partID=605955...

Unfortunately you can't! EDIT: Typo on my part: NIW Sorry - no matches. Please try some different terms. The following words are either very common, too long, or too short and were not included in your search : b21, tlb So if you search for B21 hydraulic issue, you get EVERY post with...

If only..........

While the tamers are probably good in some ways,(can see them working on grass/ground/dirt reasonably well) I'd be careful with the extenders, if you need extenders to take some load then some bolt on forks may be a little safer? http://www.ebay.com/itm/222162714776 or similar While I don't have...

Thanks Frank, I know I'm probably up for the lot eventually, but I'm really wondering about the quality/pressure ratings of the Kubota supplied hoses.(and I don't have salt to contend with, relatively warm dry environment)

Kubota supplied hoses, are they any good, what pressure? I have read that the OEM supplied hoses are possibly a bit light and it's worth having hoses made up. I have replaced a couple of worn ones on the 4 in 1 before and the WP was around 5000 psi, compared to 2500 psi for the OEM hoses. A...

No idea of quality of if a scam, but for 10 bucks you don't have a lot to loose........ http://kubota.servicemanualvault.com/Kubota-L175-Service-Manual.html And they do say 100% satisfaction guaranteed, whether that means they would ever refund your money, I'll let you read the fine print and...

Parts manual and exploded diagrams below, you can rebuild this engine using standard torque settings and clearances or grab them from a similar Honda/Kawasaki engine manual I expect. http://www.koshin-ltd.jp/partslist/engine/kubota/sek_kt_gh130170.pdf...