Search results

Full service manual here http://www.kubotabooks.com/AutoIndex...%20manual..pdf

If you get no joy with a fuel filter, AND you have good flow from the filter, try running with your fuel cap very loose, tape it in position so it cant fall off, this will prove the cap breather isn't blocked if it has one. Sometimes fuel tanks don't breath and restrict the fuel supply under...

An extension to what's been said, you have checked the fuse in the charging circuit? Check for 30V+ AC at the regulator on the dynamo leads.

Well done, there are some great helpers here.

Not the PTO lever, the PTO drive, via the clutch, does full depression of the clutch disengage the PTO drive?

Of course if you ordered a replacement head for your serial no. tractor and they supplied something slightly different, then Kumar should come good with the correct glow plugs to suit, I would certainly ask them if the first part is the case.

You mentioned earlier about engaging before start up. Can you select/engage the PTO before engine start, then start engine with clutch depressed, and cycle clutch in and out - clutching the PTO drive.

Just shove UDT in it, you won't have to think or worry about it then, pay to have it couriered? Of course many others will do the job, but if you have any concerns then you know you're good with UDT. If I read correctly, per the WSM available online, original fill is SUDT, but I may be reading...

Best to get a manual with the wiring diagram, there's a 9540 low profile supplement on the net which has a wiring diagram which would be very close I expect, check that you have variable resistance at pin 18 yellow wire at the plug going to the cluster...

As you'll see from the electrical diagram, only the PTO and HST switch are directly in line with the starter motor circuit.

The sound file/video that you posted you couldn't get it to crank, are you saying it's not making that sound when you turn the key now?

Online parts manual best free pdf file generator/compiler required Hi Folks, The kubota site which has the online parts diagrams/manuals is a handy resource. Even though I have a pdf parts manual, the online unit has a lot clearer/sharper/detailed diagrams especially when zooming in. My eyes...

I was going to add the OPC timer and timer relay, but didn't want to muddy the waters too much yet!

Sounds like the fuel solenoid or fuel pump, it would be very easy to track exactly where the noise is coming from if you lift the bonnet.

Following - I would have thought if any piston was different it would be number 2 due to increased heat, I'm interested in the outcome from a general knowledge perspective!

As a possible alternative to coachgeo's post, if it doesn't suit you to go to the store to have your battery tested, you may be able to do some extra testing to get by. If you have another charged battery to jump from, remove the ground connection from your battery in the tractor and connect...

Good job, i need to do some linkage adjustment/repair on my rusty bits, seeing your new one nice and clean makes me feel slack!

http://www.tractordata.com/farm-tractors/001/2/7/1273-kubota-b7300.html http://www.everythingattachments.com/Kubota-B7300-Attachments-Specs-s/3907.htm http://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Parts%20Manuals/&file=B7300hsd.pdf

May have some air since disconnecting/reconnecting fuel tank, air now has moved to pump, crack fuel line at pump to ensure good clear flow, re tighten, then crack injectors and crank till good flow, then retighten. And ensure stop lever is pushed all the way in if it has one.

$49 delivered if it suits www.ebay.com/itm/191480039988 or $59 here if it takes the double filter http://www.ebay.com/itm/142262816026