Search results

i like to do things in advance, even if it means wasting a bit of hay. on those cold days then i don't habe to turn a wheel :D

for the exta couple bucks i just stick with the kubota filters because they are designed for the machines. If I cant get them for whatever reason then I'll go with Baldwin. No sense cheaping out on filters, your systems wont appreciate it.

I’m curious if they are the same ones in the RTVs..

I'm having the same issue with mine (m100). Try cleaning your water seperator out. Check for fuel filter, fuel lines. But most importantly, check your fuel. Any water in your fuel with wreak havoc on your lines and supply pump. Right now my machine is tarped with a heater under it. Give...

Definetly would be nice to have one as an owner, to figure out what error codes are being thrown in my tier 3 machine. They advertise them on the kubota site, but you're not able to purchase them which makes a guy lose his mind. I get where the dealer is coming from, but if it burned up more...

it ran for a good hour before it began sputtering under load a few days ago. Went I went to start it today, it lasted 5 seconds and just fell off and died. I’m hoping it’s a simple fix and not a supply pump. The engine light comes on and off multiple times even when the engine dies. Unsure of...

I’m in northern Alberta . I’ve heard of people getting bad fuel I hope that’s not the case. I’m taking your advice and tarping tommorow and going to heat it up. I wish my shop was big enough for the tractor

hey guys i have a m100 with a v3800 engine, 2000 hours . It was running for a while and as soon as you goto move it then it just dies out. i have the flashing warning engine icon on my dash but hard to diagnose when I don't have anything to diagnose it with. So far I have changed the fuel...

Bump

I have an 1120d that for some reason shifts rough into low range and doesn’t want to stay in reverse, it’s a fight. I’ve tried to adjust the shift cable with no luck. Any suggestions ? folks. Could it be an issue with the unload spool? Thx

Another person from Alberta ***128518;. I’d check your fuel lines, also pump and injectors . Give your fuel tank a clean as well. I was having similar issues with my d1105.

Thank you. I’m hoping this helps

My machine has 700 hours . I’d have to check the wsm for service interval , but I did check my injectors at 500 hrs and they seemed ok.

I remember reading something about a lawsuit involving Deere because they wouldn’t release software to diagnose or do any modification to their machines . I think that’s most companies now Adays. I’ve always been an advocate for good strong old machines anyway but , new machines make it harder...

My 1120 with the d1105 has kinda been a pain in my arse since I got it. When it runs good it’s great but right now it won’t start . I’ve changed the fuel filter with no luck. The only other thing I can think of is the small fuel lines could be plugged ? Lifter pump? Anyone else have this issue...

I’m going to tackle this today . Hopefully I can come to a resolution.

It’s pretty bad when you buy a machine to work and it spends 75% of the time down and worked on.

https://www.amazon.ca/Zerostart-3400121-Wolverine-Transmission-Reservoir/dp/B07H361JF2/ref=asc_df_B07H361JF2/?tag=googlemobshop-20&linkCode=df0&hvadid=337115831459&hvpos=1o3&hvnetw=g&hvrand=10858005058469661352&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9001286&hvtargid=pla-56873...

1120D starts then dies. So my 1120d has 720 hours on it and for some reason it starts and runs for about 10 seconds and dies. After a couple times it will start again and run rough . My fluids are fine , my fuel filter was just changed. I ran additive through it before the temperature dropped...

I keep mine plugged in all winter long. If weather gets harsh i tend to tarp everything and throw the frost fighter under neath it. Sometimes when its -40, you still have to feed.