Search results

I would think the stud can be repaired by welding or drill and tap. Dan

It does not work that way. Dan

A disable switch in the power supply feed to the joystick will fix that. Dan

And me. Dan

As will most sellers. The actual couplers found on a Kubota will depend on the third function "kit" installed by the dealer. They are not all the same. Dan

You have a B9200 HST tractor with a V1200-A engine and a BF350 front loader. An aftermarket alternator AKA dynamo will run you about $90. However there is also a voltage regulator that could be the probkem. I would suggest you find someone that can determine exactly what part has failed...

With low mileage cars and trucks once a year is a pretty standard recommendation. I figure that works for low use tractors as well. Dan

I had the same problem when I first got my HST. I am pretty much retrained now but every now and then...... Dan

Generalizations are dangerous. I have a twin turbo BMW with GDI engine. Those engines routinely go hundreds of thousands of miles and if you are picky about the idle might benefit from a walnut shell blast every 100K or so. Mine has 135K on it and has never been touched. The last I checked the...

I take mine to the county recycling center. Just drive up and dump it into their collection tanks. No muss no fuss. They also recycle oil and batteries. Dan

I think you will find the OEM system relief valve on your L185 is located in the priority flow divider and is ahead of the outlet block. That said most OTS directional control valves are going to have an input relief. You would have to go out of your way to find one that did not. Dan

Pretty basic stuff. Kubota finally got their act together and is now putting the main system relief up front close to the pump but they still use a loader valve with a built in relief. Dan

The pressure relief is because the valve will be ahead of the tractor"s relief and is needed to protect the valve and auxiliary circuits. Without it the system would be deadheaded anytime a cylinder controlled by the valve stalls. You have plenty of flow for top snd tilt. Dan

Adding a light to go along with the gauge is usually pretty easy. You can get inexpensive panel mount combo units with light and audible alarm for about $10. Current draw is in the 10-50 ma range. Dan

Does the tractor have a light in addition to the gauge? Dan

Trade it 🤣 Dan

Once you have the outlet block the rest can be put together with standard OTS components. Sharing the dimensions for the block would be helpful for others going forward. Dan

The various styles of outlet blocks are all simple pieces that can be easily machined from a small block of aluminum. Early on Kubota provided the dimensions in the WSM but now its a big secret. Your machinist friend should have no trouble measuring the bolt hole and port spacing for the one you...

Not a rumour or a secret. Respiratory illness has me pretty much confined to the house. Shop work is out of the question right now. Dan

Exactly. The teeth on my Woodland Mills grinder appear to have conventional brazed carbide tips. Dan