MX6000 oil Seperator. What is the purpose of this?

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,391
6,472
113
NW Montana
The new engines only require oil changes at 400 hours because they are not blowing the exhaust back into the inside of the engine and making dirty oil.
I would think that the number of cold starts to get to that 400 hours is relevant in terms of oil health. Some of us will want to change oil based on the calendar rather than the hour meter. I have two tractors which reduces the hours on each, but 100 to 150 hours per year per tractor isn't unreasonable. I'm much more likely to change oil every 200 hours or 18 months.
 
  • Like
Reactions: 1 user

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
8,928
4,668
113
Myersville, MD
windyridgefarm.us
I would think that the number of cold starts to get to that 400 hours is relevant in terms of oil health. Some of us will want to change oil based on the calendar rather than the hour meter. I have two tractors which reduces the hours on each, but 100 to 150 hours per year per tractor isn't unreasonable. I'm much more likely to change oil every 200 hours or 18 months.
With low mileage cars and trucks once a year is a pretty standard recommendation. I figure that works for low use tractors as well.

Dan
 
  • Like
Reactions: 1 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,391
6,472
113
NW Montana
With low mileage cars and trucks once a year is a pretty standard recommendation. I figure that works for low use tractors as well.

Dan
That seems very reasonable. I plan on using my tractors for at least another 20 years, so both are on a preventative maintenance program. (y)
 

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,847
5,070
113
Eastham, Ma
With low mileage cars and trucks once a year is a pretty standard recommendation. I figure that works for low use tractors as well.

Dan
I feel that the Kubota 200 hour oil change recommendation is too long, for my usage of only 10 hours per year.:rolleyes:
To be conservative, I will instead change oil at every 100 hours.
Thus, my next oil change is planned for 2033.
In 2033 I will only be 92.
If alive then,..... probably will not give a chit about changing Kubota oil. ;)
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,552
6,600
113
Sandpoint, ID
Yes I'm in the camp of low use per year = automatic filter fluid changes per year because of non use.
 

Sean2202

Member

Equipment
L305DT
May 27, 2019
37
8
8
CT
Thanks for all the replies. I did not mean to open a can of worms here.

I have gotten in the habit of running oil analysis on our equipment at the golf course. When this one is analyzed I will post up a new thread on it. Oil separator at 1500 hrs. We do on average 3-4 hundred hours per year on most equipment here.

Happy tractoring folks!
 
  • Like
Reactions: 1 users

sitric

Member

Equipment
L2850DT Ferguson TO35
Jan 13, 2023
71
54
18
Michigan
You didn't open a can of worms. It is the internet, and everyone has an opinion.
 
  • Like
Reactions: 1 user

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,052
3,323
113
Texas
If one had a can of worms…. one might have a Diet of Worms.



4BD845CB-1BCF-49AF-A34F-2CA86905F196.jpeg