Search results

Snowblower and frame off and stored out of the way and FEL back on to move snow banks back. Great fun! :D

If it's an ice issue, Stud them and be done.:)

FEL off and Snowblower serviced and installed. Looking at 2ft + Lake Effect Snows in the next couple of days. WHOO HOO! Fire up the Snow Machine and ride, after the clean out that is.:)

I've used it as a touch-up on an old Pump action I had. If the gun has any value I would take to a Gunsmith and get done correctly.

I would get the torn section back together by hammering. Then grind/ sand and start filling with welding material. Finish off by grinding/ sanding smooth to rest of the housing. The welded material will be harder then the original. Clean metal is the key to this, good luck.

Same thing on my B3200, FEL and Blower. Spray on Spray 9 and Power wash off after the season. Let dry and grease it up for the summer.

I'm lucky to have a friend with a sand pit and fill up about twice a year. I mix with salt and store in a heated garage as needed. It takes about 50Lbs of mixed to get some grip on my driveway, which could be a bobsled run if left untreated.

I would calculate a new size based on SQ Ft and construction of the house, try this tool https://www.supplyhouse.com/sh/control/BTUCalculator

Now have 97% Propane Hot Air. In the new house planning on 97%HA with a Hot water coil supplied by a HI Eff wood boiler which will supply the garage and hot water on the domestic side. Building on a 40 Acre lot I have that's wooded an pastures , hopefully within the next year.

https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=73&acctid=12307 On Gov Deals Website, Happy bidding:)

Thanks! Somebody had to say it.:)

https://www.amazon.com/Digital-Circuit-Extended-Voltage-Stainless/dp/B077YM5QL8/ref=asc_df_B077YM5QL8/?tag=hyprod-20&linkCode=df0&hvadid=242022044358&hvpos=1o1&hvnetw=g&hvrand=13688220266292639835&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9005272&hvtargid=pla-465721548448&psc=1...

25x10.00-12 Carlisle AT489 ATV Tire 4 Made in USA

Put in Studs and be done, EZ :)

I use 10ft 2x4's cut in half and ripped down in half on the table saw, cut points and paint them red. Then add reflective tape at the top. Like RCW said drive them in about a foot or so from where your clearing.

Re: Man Made Global COOLING?! I live by the biggest wind farm East of the Mississippi, Maple Ridge Wind Farm here in Northern NY, with more being built every year. They are an eye sore to say the least as well as the environmental issues, dead birds, oil leaks. They don't start on diesel...

Very Cool! I hope that they Copyright all Software and get a Patent on it. Also get it in front of every Big Pharma CO. out there, they'll would jump on it. After all the heavy lifting as been done. Let them do the Clinical Trails and document on a FDA fast track.

Re: Man Made Global COOLING?! -1F. here this morning at 6 AM . Its gotta be Global Warming, ask AOC she'll tell ya!

Are the augers in the correct orientation, to one and another?

Re: Waht are you using to clean up after oil change 2X times on Brake cleaner, it's like a mechanic's candle in the shop.:D Well 2nd next to Kroil , It's the perfume:)