Search results

I run a Salsco Chipper on my B3200, 26Hp @ the PTO, handles 4" dried Pine with no issues. Salsco is direct drive no belts. also two knife's and the flywheel weighs 150lb, And made in America. Great bunch of guys to deal with, Call and ask for Sal and he'll answer any question you have.

http://www.orangetractortalks.com/forums/showthread.php?t=24153&highlight=BX24 It sure looks like it would work and a lot easier than moving the motor forward.

A bucket trap will get those critters 1: 5Gal bucket 2: wire coat hanger 3: 1Gal anti-freeze the non-toxic pink stuff 4: 1 can of beer(your choice) Empty beer can, poke a hole in the bottom and top of can. insert wire from coat hanger thru holes. Drill 2holes in the top edge of the bucket and...

Re: Woods Groundbreaker BH6000 Backhoe Questions? I think it was around $6300 installed and the Kubota ran about 2K more. I had some other work done at the same time and it was a couple years ago.... :)

Re: Woods Groundbreaker BH6000 Backhoe Questions? I have a Woods BX 70 BH on my B3200, works great. I haven't found anything it wouldn't do for me within the machines limits. Bought it over the Kubota because of $$$.

Down and dirty use Por-15, and repaint. Have used it on a couple of restos i'v done and it work great.

I put studs in my R4's, work great on my hill/driveway. Don't tear up the blacktop.

Anyone fabed up a Dollie for moving their BH? Looking for suggestions for my Woods BX70. Thanks, Tom

Seriously thou, Snow machine helmet is the way to go. You usually can find one at a garage sale, but only use it for blowing snow. You don’t know the history of it and the integrity of the shell could be compromised.

I turn the heater blower on:D

Should be no issue with the truck, the trailer may be on the light side. I tow my B3200 with a FEL & BH with my 1500 series GMC, but just upgraded to a 10,000 LB trailer, the 7000 Lb just didn't feel right.

Just picked up a SureTrac 7X18, 10,000 GVW, to haul my B3200 with FEL & BH. It is replacing a 7X16 7,000 GVW it was a tight fit and way to close to the weight limit. Having the extra 2ft will be a big plus on getting the weight in the right place. It should pull and handle muck better, it's 250...

Hey all, I need to get a trailer to haul my B3200. I'll looking for the weight with a Loader and Backhoe. I wouldn't think it's over 4500lbs... correct? Looking at an all alum, dbl axel with 7000Lb gross wt. Thanks, Tom

Thanks, I saw one of those at Tractor Supply today. How about the heater it self. Does it mount in a freeze out plug? Thermostat area?

Hi all, New to the Kubota world, Just bought a 2011 B3200 with loader and front mounted snowblower. I'm looking to install a block heater with and outside temp. controller to turn it on and off. Any such thing out there? Thanks, Tom