Search results

If you buy it, perform a cylinder leak down test before you change out the motor. It may be a intake and or an exhaust valve issue. Check the Kohler web site for the manual on it.

You may have to go with a custom build. Plenty of those shops around.

I've been thinking the same thing... What the Hell is an oxidization Pond??? I was a Licensed Home Inspector and have never seen anything like that and I've seen some nightmares on the waste disposal systems side. Nothing like that in the northeast, I hope. But if it works where you'll are its...

Yea, you don't want to stop fast with that load. :eek:

When I upgraded the seat on the B3200 the seat switches where 1st priority, that had to work as designed. I run a chipper as well as brush hog, and then the Safety factor. I had to modify the base for the new seat to mount directly onto the1 OME seat slider and base brackets. It ended up being...

Oh the "Citidiots" will start showing up today!;)

Oh yea, we're on it, Fuel, gas, beer.. Check. We're good to go. Should be able to get out and ride some sweet trails by Monday on the Doo, once the clean up is done. :D

What's that yellow machine behind your shiny Kubota? Does it have tracks?:)

Yea, so we're looking at 2ft plus by the weekend. Tomorrow will be fuel,gas and beer. Bring it on!:D Should be great riding by Monday for the snow machine.. Whoo-who!

https://www.wwnytv.com/2020/02/21/gathering-allis-chalmers-tractors-coming-st-lawrence-county/ Any A-C fans out there, this looks like fun.

400 Hr service, Anti-freeze change and front axel oil change. All good :D

Well I can't post up pictures at this point so PM me and I'll forward some pic's :mad:

I swapped out the OME to one of the RK ones that were on sale last year. 100% better ride and comfort than the original. I had have to fab up a new base plate mount it. I'll be doing the 400hr service later today an take some pic's and post them later.

All's well that end's well, find the correct motor on-line and carry on!:D

The plug your showing is 3 phase??? Need to see the wiring connection in the motor.

Well that explains it.... It German. They run some odd voltage on that side of the pond. It's most likely 220 V single Phase

The name plate should state the Phase of the motor. Without seeing it i'd say it's 208/480 3 phase.

Just a word of caution on acetone and atf. NO OPEN FLAMES>> Of any kind in the area or risk a big flame. From an OLD HAZMAT 1st responder.

I've used Wix filters on all most every thing I've ever owned and they worked great, except on any Hyd. system, why risk it for a couple of$.

I've used this type in my past live or it lives.... I don't know. Their not for a non-electrical person to install, but they are EZ to set-up and use. Good luck with your search. https://www.onsetcomp.com/products/data-loggers/browse-by-measurement/energy_power