Search results

On my b2650 (basicly the same as the lx2610) i used a full synthetic at 50 hrs because its my snow moving machine. The brand of oil i will not suggest one because every one has their brand that is better than all the rest and what you choose is up to you. I went with a 10w30 weight api cf rated...

Here is my opinion if it means anything. Since you found dirty engine oil and water in the brush cutter you may want to change the hydraulic oil and front axle oil too then you have the piece of mind knowing its good. If you dont want to change the oil you could use something like a long zip tie...

Your nearest advance auto parts or farm and fleet store may have it in stock. If neither have it you can get it online from the usual places.

As russell king mentioned they do make gauges specifically for loaded tires. Milton industries air/water tire pressure gauge is one that is made to check loaded tires. I have one for my tractor, its tires are filled with calcium chloride. and that gauge will measure the pressure with the valve...

Sounds like it may be a bearing going bad check everything that the engine fan belt drives. For example alternator/ dynamo, idler pully and fan. Any bearing play would indicate a bad bearing or grittiness when you turn it by hand.

That is your front axle vent tube and it not normal to have any oil come out of it. It's possible the dealer overfilled the axle case and when you ran it as the oil expanded it blew some out. I would check the oil level before you use it next. Check your owners manual on how to check the oil...

Measuring o-rings are a pain but you can do it. You will need a caliper to get your dimensions. You need to measure the O.D. and the I.D. then google an o-ring size chart and find the closest match to your measurement and that should be the one you need. Another option is go to your local...

If you have a smartphone you can download the my kubota app and access the owners manual there.

That's a JIC fitting they seal via two matching tapers. I would try removing the line from where it's leaking and inspect both tapers for any problems. obviously this need to be done with the tractor off and no pressure. If you don't find anything then clean both the hose end and the tank end...

Thats not much information to go on. There are many manufactures that color their fluid. Most likely you will never find out which brand it is do to the many that are out there. The dye can also be to any brand of fluid. What are you trying to do add some or replace the fluid?

Oh you got me.

Even with a favorable credit rating you may still get denied. I was denied i didn't have a long credit history (and a non favorable score) so i expected it. We added my dad (with just under an 850 credit score) and he was denied. Our plan was to build my credit but ended up paying 100% cash for...

If you want a print manual go to messicks. The manuals are pricy though and will take 7 to 10 days to order. They come 3 hole punched so you will need a 3 ring binder that will fit the manual. Here is the manual I found make sure its correct one before ordering...

You may be right but the only way to tell is to send in an sample for analysis. I recommend blackstone labs you may want to contact them to see what tests should be done. I would love to see how the the 2000 hr oil trans/ hydraulic oil comes back.

The OM on my 2650 also stated the primary air filter can be cleaned with compressed air as long as it is 30psi or less.

I am with you its not that expensive for a new air filter so I just replace mine. Although I will use compressed air to clean out dirt and debris if needed. I also just replace my fuel filter even though kubota says you can clean it. In my opnion you should always have a spare air and fuel...

Happens all the time to me on the other forums I am on. usually it take me forever to type an answer. Actually usually someone else replies before I can finish typing and I have to start all over. for example this answer took longer than 5 minutes to type. 😂

If its like the b2650 there should be a t fitting going to the rear. When you press either the front or rear washer it will do both all the time its a very simple system. Try and folow the hoses from each nozzle and see where they go. If you cant find anything call the dealer you bought it from...

https://www.kubotausa.com/finance/special-offers Select tractors Then Compact Should be about 5 item down

For my B2782b manual says 24 hrs or once a year that where I got my number from. I some times will re grease after breaking a sheer bolt depending on how long it takes to notice it. Crash277 Great idea removing the sheer bolt and spinning while greasing I am going to try that next time.