Search results

Even without plugging breather when I removed the filter on my 2650 I lost about two quarts of fluid (i was attempting the vacuum trick but it failed). If you have a new drain pan or one that will not contamate the fluid you could resuse it. If you are quick enough you will loose alot less fluid...

The owners manual says 400 hrs the work shop manual says 50 for the first hst oil change. When I did mine I did not do a full change just the filters. If I where to do it again I would change the hst oil at 50 hrs. My reasoning being when I took the hst filter off I lost about 2 quarts and the...

While I don't have that model tractor as long as the lights go out when the engine is running eveverything should be fine. I would think its just like a car with the key in the on position the battery and check engine light will come on until you start the engine. The battery light is basicly...

On our B2650 cab I calculated it used an average of just over 1/2 gal per hour to be exact .589 gph over the first 64hrs. The usage was just a front mount broom (~48hrs) and a snowblower (~16 hrs) not the most strenuous use but interesting to know. I should have seperated summer and winter rate...

Yes, you should see oil at the level check plug. As for oil recommendations follow the manual. if you decide to use a gear oil just remember that not all gear oils are yellow metal safe. a yellow metal is a copper, brass, or bronze metal. The gearbox you have is called a worm and wheel gearbox...

In the grease you listed it's right in the name its a lithium complex. On most greases you need to look at the data sheet or for example amsoil its listed in data bulletin as the thickener. In the safety data sheet one of the ingredients would say bentonite clay or clay something. If you can't...

Yes clay can be NLGI #2. The NLGI rating is the grade or the spec the grease has to meet or exceed. Clay is just the oil carrier also known as a soap. There are many different soaps common ones being clay, polyurea, aluminum, lithium, aluminum complex, and lithium complex. All of thease soaps...

From what I have found its a standard 1156 bulb. I am looking at going to led in my 2650 and am over researching led bulbs. Sent from my SM-N950U using Tapatalk

Re: B23650 black diesel exhaust Like everybody else said you most likely have snow/ice in the airfilter. Once you remove it and dry the filter you should be good to go. Removing the intake tube goining to the air filter will prevent the snow from being sucked in. You just need to remember to...

I have watched the snow slide on top of the ground. When i watched it it was caused by the giant auger gearbox up front once snow starts building up on the gearbox its a snowball effect. Literally. For the bogging down issue check the airfilter for snow and ice. If you have not already removed...

Here is what fits... I tried a trico rear 12" 55-121 using adapter A and it works fine. Pau7220 got it right with the 12-A blade that is the exact replacement size. Sent from my SM-N950U using Tapatalk

Length is 12" Looking at some picture online the Toyota RAV4 looks to be the closest one. It makes sense too being Kubota and Toyota are both Japanese companies. Sent from my SM-N950U using Tapatalk

Okay, while I was taking pictures I figured out how to remove the rear wiper. To remove the rear wiper blade you need to pull the blade half under the arm past its angle stop. After that it comes right out. Pic 1 is the assembly. Pic 2 is the arm end with the wiper removed. Pic 3 is the blade...

Thanks I will try to get some pics later tonight. I will say It's not a standard j style wiper arm it's completely plastic. If I can't find a replacement i will just change the rubber part. Sent from my SM-N950U using Tapatalk

Has anybody replaced the rear wiper blade on their B2650 or B3350 cab model? I have been searching and searching but can't find any information on a size or part number except the entire arm for ~$80. I have tried to remove it but it doesn't want to come off and I do not want to break it...

If you wanted to you can spend days researching oils and greases. The link is a chart of the base soaps used in greases and their compatibility with each other. Usually the grease manufacture will tell you what type of base soap the grease is, if not you may have to look into the safety data...

Well that is up to you. I was doing them on my car and boat for a few years. I learned some interesting information about idling for long periods. I may do them on my tractor just as another oil change record and to see whats the oil and engine is doing. A lot of problems can be detected in an...

The hoses for up and down control go under the axle and the chute rotation go over the top of the axle. This is how mine is set up. Sent from my SM-N950U using Tapatalk

summit-hydraulics.com and hosewarehouse.com have 1/4" NPTF flat face connectors. on summit they are under the iso 16028 connector and on hosewarehouse they are Dixon 2htf2 for the coupler and ht2f2 for the plug end. hosewarehouse also sells Eaton brand flat face but i don't have the part numbers...

When I replaced one of my hydraulic quick couplers I used Vibra-TITE 440 hydraulic and pneumatic thread sealant purchased on amazon. There are many brands of thread sealants you can use. Teflon tape should not be used but it gets used all the time even by a lot of dealers. Sent from my...