Search results

What is the torque spec for the main frame loader bolts ?

Thanks for the reply, I'll look it over very closely. I did notice that it also does it now when doing down pressure in reverse.

I was leveling stone today behind the tractor shed, seems every time I set for float mode there is a very loud "click" coming from the loader....is that normal, seems too loud for that. Almost sounds like the loader will self destruct. I looked around all the connections, seem fine, don't want...

Don't forget to add the green slime.

The ride is ok , traction when using the FEL in 4wd is great, but when mowing in moist grass be sure to disengage 4wd or you will tear turf when making hard turns. All in all, R14 tires are very good all around.

I think I've tried everything as to the manual. The left front does not want to cooperate. Also it drops heavy on that side, made the adjustment to no avail.....long day, I'm tired and, it's hot and, humid here. All this for mowing grass, I think I'll just buy a half dozen sheep. At least I can...

3 hours....yes...3 hours, this thing just would not cooperate. there has got to be a better way.....I'm done, going for a bourbon, that grass can suffer it out.

I use both...a plug and, green slime. Like preventive medicine.Less to worry about.

Or a better pair...LOL

I gave up trying to find the noise....so my solution was this....until something breaks but not my loss of hearing,

How do you remove that spring to slack the belt?

The drive shaft trying to get it on the PTO shaft....soft mallet no great force.

I am going to remove the cover on the right side, there is a rub mark on the inside, did not give it much thought but, you may have hit on something that I just dismissed as nothing but....it could be. belt is a little frayed on top. I will check that out in the AM...if I can sleep or I'll be...

Yes, I just hooked the deck up, my spline protrusion looks about the same, perhaps a little shorter, could be the angle of the pic though.I did not hear any change in pitch lift high or low. Since I installed the DS, which was a pita, I've not been able to remove it...seems stuck. I had to use a...

Thank you for the replies, It's a BX2200 with loader and a RCK60B-22BX deck.

I can't tell if it's from the deck or the PTO. Mows OK but it is LOUD to the point of pain. Deck has fresh oil in the gear box all fittings are lubed. I did have a bad time installing the drive shaft, seems tight. Some of the PTO shaft spline is protruding out of the yoke, is that normal?

In a pinch I use dental floss wrapped close to the plug head.Just wrap it tight...good to go.

Amazing, we went from scams to taxes in the same thread. Oh, wait, it's one and, the same. LOL

I just received a message yesterday from a new that day member, who stated he has a friend that has a 54" deck I was looking for....told me to email his friend, new member that day it seemed. I just made a deal with Murph for a 60" deck. I replied thanks but I had a deal made already. Strange...

OUCH !