Search results

My L6060 always goes to 100% before it regens. It may even go to 101% just as it is getting ready to regen. My engine does need to be fairly warm, and at least 2000 rpm before the regen will start. Even my dealer's service manager did not know when the regen would happen. He even said " keep...

Or you can identify the hoses with wire ties, colored tape, paint, etc, so you know which hose goes where.

Is there a floor pan under the seat you can remove if needed ?

Could you put all the attachments on a trailer, and connect the trailer to the tractor ?

Does the engine still turn ? If it is the oil relief valve, that would mean no pressure/ little if any lub.

I am going to guess and say the 40 amp fuse powers more than just the starter. A wiring diagram would be a great asset. Check the fuses in the fuse box, One may have blown there also. I agree jumping at the starter, it should at least crank. I would get a WSM at kubota books . com, this will...

intelligence is the ability to adapt to change.

I would go through the owners manual if you have one. If not I believe it can be down loaded. Just google it. I believe "kubotabooks.com" is what you want, but I may be off a bit. Once you go through the manual come back here and ask any questions you have, there will lots of good answers. If...

The L5030 is not a hard tractor to operate. I had a L5030hst with the cab, and my (at the time) 14 year old girl could operate it to feed round bales in the winter. I trained her how to use it and she did well. If you can get some one, or a training course to learn how to use it better would...

I got my sea legs standing on a hay wagon piling bales.

Given a choice, I think I would rather fall in, than my tractor.

The bucket that came with my L6060, is called a "lite material" bucket, I have loaded a lot of rock with it and have had no problems. The bucket should be at least as wide as the wheels, I can't see a 6' doing that.

Excellent. How did you bent the hooks ?

Good thing he did not use a milwaukee, he would have needed wheelie bars and a parachute. 😂😂

He should of put at least one more on, out over the roof of the cab, to put some weight on the front.

Forestry can be very hard on tractors. It all depends on how how it was treated. It COULD be in good condition, or it COULD be beat to death 🤷‍♂️. I would pay the extra and get the better machine.

The blade angle cyls must be good.

Did you consider a tube ?

Another option might be your dealer. He will want to buy at wholesale price, But is probably the fastest and easiest.