Hi all. My 2601 stopped running and I pulled the oil pan to check piston clearances and I found a little spring in the pan. About 1/2" long and almost looks like a fuel pump spring but that is still there. Any ideas where this lil guy belongs? Appreciate the insight..
Spring in oilpan
- Thread starter kabota723
- Start date
I don't know if it is possible for the oil pressure relief spring to make its way to the pan, maybe you could check that it is still there behind the oil filter. The part number is
#1J050-36950 SPRING
if you can find one at a dealer for comparison.
#1J050-36950 SPRING
if you can find one at a dealer for comparison.
Awesome! Cool, I'll check that out. Thank you.I don't know if it is possible for the oil pressure relief spring to make its way to the pan, maybe you could check that it is still there behind the oil filter. The part number is
#1J050-36950 SPRING
if you can find one at a dealer for comparison.
Ktrim
Well-known member
Equipment
B2400, lA352 loader,3pth quick hitch/z122r zero turn/restored 52 farmall super a
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
just the spring ?
I don't know that engine, but on others, there's a 'series' of check ball, spring, retaining cover,bolt so I'm wondering HOW just a spring got into the sump ??!!??
I don't know that engine, but on others, there's a 'series' of check ball, spring, retaining cover,bolt so I'm wondering HOW just a spring got into the sump ??!!??