Search results

I would suggest removing the spool valves and take it to your local hydraulic shop for testing. Three years ago they were $3700 at Kubota. Both times I had this problem it was the spool valve.

This is the bh77 inlet line on my lx2610. My 3rd function inlet comes from the bh77 outlet. Good luck.

Look for rust on the HST linkage under the tractor. Spray with penetrating oil.

R-14s Messick’s had an interesting video about tires on youtube this week. Seems like the R-14’s will damage a lawn.

Landpride RTR1258.

Why do you have to get off your tractor? I have owned 3 Kubotas, at different times, with Quarter Inching position control, but didn’t dismount to readjust bush hog after turning.

Why not just use your backhoe to remove the trees? That’s what backhoes are for. Backhoes are better at digging than lifting.

Is the o ring actually missing or is out of the seat. If is still there, you can work it back in place. You can just replace the o ring.

There is an o ring in the female. Check to see if it is out of place or nicked.

Wiggle your HST peddle while trying to start the engine. To see if your HST is returning to center. If it isn’t returning to center the engine won’t start. Also, make sure your pto lever is fully disengaged.

Well, yes it is. I didn’t notice the location.

There used is a B2620 TLB on TRactorHouse.

With the backhoe boom locked in the up position, it takes up less space. You can also swing the boom to the side to gain space.

Surely this a BabylonBee article. 😂😂

Attached with grade bolts.

I used a shop vac hose adapter/reducer from Lowes. Put the end in the filler opening, turned the vacuum on and changed both filters. I lost very little hydraulic fluid.

On the LX 2610. There should be a warning light on the dash when parking break is engaged.

I changed the hydraulic and transmission filters on my LX2610. 249.8 hours. Originals changed at 47 hours. I used the shop vac and that worked really good. My shop vac hose is only 1 1/2”, but I had an adapter to step up to 2 1/2”. The hose adapter was a good in the fill port and created a...

My neighbor bought a BX2380 last spring. Dealer recommended the 48” LandPride. He mows with the fel on for balance.