Search results

The landPride 3rd function valve came with matching flat face couplers. When hooking those couplers back up, you never knew if the grapple would open or close like it did before.

On Saturday I had 1 more batch of brush to pick up with the grapple. The grapple opened, but would not close. So, I shoved the brush pile down to the burn pile. On inspection, I found the male hose fitting had popped out of the female fitting. Oh, good, easy fix. Nope. The o-ring in female...

I spent all day yesterday and 5 hours today clearing a customer's fence line.

TractorHouse is a good place to advertise equipment. Your first add used to be free. I’m not sure about now.

Jealousy comes in all shapes and forms. Ignore that useless rectum.

1 of the quick connects on my grapple started leaking. It would leave a small puddle over night. Removed the o-ring and the hydraulic shop matched it. That fixed the leak.

Could the o-rings in the female fittings be damaged or undersized?

Those spacers are around $1100. 🙄

I took a really good photo of our Schnauzer yesterday.

Tuesday I cut this Poplar tree down. Thursday I dug the stump out and backfilled the hole. Then I smoothed the section of road that the tree was causing drainage problems.

Bush hogged a customer’s 2 acres this afternoon.

Changed the oil, filter, outer air filter. Fuel filter and front axle fluid, which should have been changed at 400hrs. 524 hours.

I’ve been on this site for over 10 years. And I haven’t been bothered with popup adds until recently. These useless pop up ads started showing about a month ago.

I cleaned my LX2610 up yesterday. I had used it for two weeks putting two culverts in. Digging creek gravel and covering the two culverts.

The white F150 had the 5.0 engine. The gray F150 had a 2.7 Eco boost. Both did fine pulling my Kubota. Grossing about 11,500 lbs.

If you blow up the picture of the locking pin, there is paint and a chunk of metal missing. Looks like something hit the bh boom real hard. Check the left side of your backhoe to look for damage. It could have been hit sitting on the dealers lot.

https://woodsequipment.com/products/landscape-attachments/rear-blades/rbs72p/

This is my solution for better https://a.co/d/dwdGaeh Lighting.

Have you tried Messick’s? They have filters for B9200.