Search results

  1. beckmurph

    Towing B2620 back to garage

    Put in neutral and push it. Yes you could tow it in neutral. Just make sure you can stop it. Sent from my iPhone using Tapatalk
  2. beckmurph

    Backhoe vs mini excavator

    Here are the specs on that https://www.ritchiespecs.com/model/volvo-ecr28-mini-excavator Not a lot of difference in digging depth between the mini and bh77 [emoji102]. Sent from my iPhone using Tapatalk
  3. beckmurph

    Backhoe vs mini excavator

    The Kubota BH77 is or was around $7500 plus tax, installed. What mine cost in 2015. The BH92, if it would fit your 3400, is several thousand more. Sent from my iPhone using Tapatalk
  4. beckmurph

    B3200 cyl4 damage

    If you use the alternator, you will need the wiring harness from Kubota. I believe. The dealer replaced the dynamo on my 2012 B3200 with the alternator, when I bought it. They had to take the dash apart to add the new wiring harness. Sent from my iPhone using Tapatalk
  5. beckmurph

    Re-Installing a BH77 onto a B2650

    Here is the same problem you’re having, with the fix: https://youtu.be/hB0JAGS-T_k Sent from my iPhone using Tapatalk
  6. beckmurph

    B2650 Question

    Someone on here tried a 72” rfm on his 2650, on a fairly steep lawn, and it was underpowered on the hills. Sent from my iPhone using Tapatalk
  7. beckmurph

    B2650 DRAIN/REPLACE Hydraulic Fluid

    There are 3 drains for the hydraulic fluid. One on each side at the lowest point. One also on the mid pto. On the very bottom of the transaxle you will see 12mm? studs, that look like the rest of the studs that hold the casing together. Your owners manual will show where they are. When I...
  8. beckmurph

    Kabota Bx25D runs great for 20 min then stalls out

    There are 2 fuel filters on the BX25. 1 is under the deck, inline with the fuel pump. The other filter is on left side of engine. Just above the oil filter. Sent from my iPhone using Tapatalk
  9. beckmurph

    Please help ASAP

    Try this...
  10. beckmurph

    Trailer size for our new puchase

    I would suggest a 16’ trailer at the very least. An 18’ would be better. Tandem axles with brakes. Sent from my iPhone using Tapatalk
  11. beckmurph

    B2601 TLB and B2650 TLB lengths

    My B2650tlb rides on an 18ft trailer. The fel against the trailer bulk head, and backhoe bucket flat on the deck. With a 16’ trailer you would need to swing the backhoe to one side. Sent from my iPhone using Tapatalk
  12. beckmurph

    L3830 Backhoe

    Tractordata shows the l3800 with a BH77. Sent from my iPhone using Tapatalk
  13. beckmurph

    Backhoe for L2501 Questions

    Well, my rear tires are loaded with beet juice. I have not had any problems. The 16” bucket is a good size for your bh77. It rarely gets packed with dirt, like the 12” bucket on the bx25 did. . This Poplar stump took 1 and 1/2 hours to remove. Sent from my iPhone using Tapatalk
  14. beckmurph

    BH77 Backhoe Subframe Interferes w/ 3pt Leveling Link

    Can you turn the bottom section of leveling link to face out instead of in? Sent from my iPhone using Tapatalk
  15. beckmurph

    looking for a rocker switch box to mount on ROPS

    One more on Amazon: Sent from my iPhone using Tapatalk
  16. beckmurph

    looking for a rocker switch box to mount on ROPS

    Here’s one style. Sent from my iPhone using Tapatalk
  17. beckmurph

    looking for a rocker switch box to mount on ROPS

    AutoZone and Advance have rocker switch boxes that may be similar to what your looking for. Sent from my iPhone using Tapatalk
  18. beckmurph

    Loaders

    Same frame. Just more hp. I believe it should bolt right up. Sent from my iPhone using Tapatalk
  19. beckmurph

    B2650 RPMs during start up, operation, and shutdown

    Unheated. 10-15* Fahrenheit. Sent from my iPhone using Tapatalk
  20. beckmurph

    B2650 RPMs during start up, operation, and shutdown

    My B2650 stays in my unheated garage. When I start it in cold weather, I do not move the throttle up before starting. But, it will have a higher idle when it starts. So, the manual states to set the idle manually, but the tractor is programmed to raise the idle. My B3200 did the same...