Search results

Spray foam will need to be covered for two reasons. Fire code and it will degrade from sunlight.

Yes. Whenever I switch attachments I always cycle the lever to relieve all pressure. Makes attaching so much easier.

I looked up the weight of rim guard/beet juice and it adds 80lbs to the tire assembly. Should be able to get it into your hatch as long as it will support the weight.

You didn't post a picture of what they look like. Check McMaster Carr.

You could also find someone that does plastic welding and have it repaired. Just an option.

I googled the two part numbers posted and there is other suppliers. Now that you have the part numbers that's half of the battle.

If it's a 2 second job to remove cover then leave it alone. If it takes longer then drill a hole and put a body plug in it to cover hole. Or leave it open like the other side.

There should be one more plug on the very bottom. That is for draining out all the old oil. To check oil level it should be at the bottom of the front plug. Top plug is for filling.

Looks great. Had a Bolens H1502 that had a stack pipe. Makes a smaller tractor look tough like the big boys.

Is it possible it could be the overfill tube?

Owned lots of tractors and my B2610 has got to be the hardest tractor ever to see the oil level. Make sure your on level ground with the engine off. I like to remove dipstick and wipe it clean, then recheck it again with the light hitting it just right so you can see it. Have also removed...

I don't go out and start it but I do put a battery tender on it. May not need it if it sits for a couple of weeks but makes me feel better knowing battery is fully charged when I need it.

Don't have a 2650 but do have a 2601 with the same issues. Picked up a piece of exhaust pipe with the appropriate bend and attached. This changed the outlet to a more downward angle. Not perfect but a lot better.

Do you mind me asking how many hours are on the blower? Looks almost brand new. Premature bearing failure, why?

Have been buying the Kirkland batteries from Costco. Decent price and they last as long as others. Seems to be the norm that nothing lasts as long as they used to.

Is it only the BX series that uses a cooling fan? How are the larger hst tractors doing it?

I would imagine it would be very difficult to add to the housing. Can you imagine if one of the bolts came loose. There goes a shear pin.

Merry Christmas to everyone and good health to all. Please let this year be filled with less family drama, I don't think I can take it much more.

Not trying to rub salt in your fresh wound. I looked at your pictures and for a new tractor my 3 year old B2601 has less rust and its used to snow blow. Sorry to read about all your Kubota troubles.

Are these pictures of your new 2601? If so am I reading the size correctly as one is a 12 and the other a 14.