What did you do to or on your Kubota today?

[ajschnitzelbank]

Loaded a mortiser in to my truck (selling it to a friend). Wasn’t heavy, but I’m lazy. I didn’t even bother to move the wife’s car luckily I didn’t drop it on her hood .

Way I look at it, I spent all this money on this darn orange machine, I might as well use it as much ass possible!

 

[cptbarkey]

Hi. New member here. I bought a 2007 BX2350 in Missouri last month, it sadly had what I would call abuse of a bad mechanic. I believe he misdiagnosed a fuel issue and instead removed the head. The owner gave up on the mechanic after he held it for over a year. I have ordered almost all the parts to redo the head gasket, fuel filters, fuel pump and see what happens. Last night drained all fluids and replaced filters. This morning I checked the electrical, had to clean the positive terminal and she is showing 1372 hours. The fuel pump was clicking nicely so may skip replacing it. Hoping to have it running by Christmas.

View attachment 116444 View attachment 116443

Quoting myself for traceability, I put Kubota UDT back in Sunday night and Monday noticed a small puddle. I had replaced the drain plug with a new copper crush washer because I noticed a leak before but guessed it was the plug after I had powerwashed the rear. After jacking it up discovered an axle seal leak has been occurring. Ordered seals for both sides from Coleman Equipment, along with a steering wheel center plastic piece, and always need an excuse for new tools. Read quite a bit of warnings about snap ring pliers, we'll see if a knipex 7 inch 45 degree will work. The WSM photo looks like he ran over his pliers.

 

[dirtydeed]

I take it digging/repairing from the far end first and making the closest connection last wasn't an option?

We took on the worst part of the landowners sewer line first. The "problem child(s)" are fixed as of today. we didn't have an issue with flushes today...since I tore thru the water line . Then came the rain!

I do get unhappy when they bury the water line in the same ditch as the sewer line...often one directly below the other... that peeve's me off.

Everyone is reconnected now so flushing their turkey dinner waste shouldn't be an issue. Will go back to finish the last run another day when we dry out a bit.



PS- got the blinking fuel light on the mini at the end of the day today. So, it ran for about a day and a half...it's a bit thirsty.

 

[fried1765]

Quoting myself for traceability, I put Kubota UDT back in Sunday night and Monday noticed a small puddle. I had replaced the drain plug with a new copper crush washer because I noticed a leak before but guessed it was the plug after I had powerwashed the rear. After jacking it up discovered an axle seal leak has been occurring. Ordered seals for both sides from Coleman Equipment, along with a steering wheel center plastic piece, and always need an excuse for new tools. Read quite a bit of warnings about snap ring pliers, we'll see if a knipex 7 inch 45 degree will work. The WSM photo looks like he ran over his pliers.

View attachment 116610

View attachment 116613

Knipex makes/sells great stuff!

 

[Siesta Sundance]

Happy gobbles day orange lovin dudes!

 

[trial and error]

Happy gobbles day orange lovin dudes!

Back at ya @Siesta Sundance
and all others

 

[Bmyers]

Been helping the wife in the kitchen. Two turkeys stuffed and in the cookers. All the sides partially prepared waiting for the time to start. Family should be here at noon and the feast will began.

Hope everyone has a great Thanksgiving.

 

[Hkb82]

Snow is coming. Got the blower put back on the rear and a quick service. Man I wish I had a front blower. One day maybe. Saw this for sale but unfortunately it’s for a la1154 loader set up and I’m running a m21 on my m7060. Not sure if it would fit but I am sure I’d hear about a 9800.00 dollar blower from the boss. She would get over it lol

 

[johnjk]

Still on the sidelines. Cold but sunny day. Watching the wife clean out the flower beds. She did hook up the propane torch for me so I could burn weeds in the walkway. Rather be on the Orange. 3 months to go.

 

[TBayOrange]

Good thing winter is late up here, put the snow blower and my new quick hitch and new rear blade.
I have also long suspected that my hydraulic pressure was low so I put together a fitting and gauge to test it. After warming up the tractor I tested the pressure and sure enough I was running slightly less than 2200. I put the shims that I purchased in and now I'm sitting slightly less than 2500 so now I'm right on spec. Good day all in all.
Cheers

 

[mdhughes]

Put the grapple on the L3901DT and moved a couple logs to be blocked up and split. I got started late today, I had rotated tires on my wife's Tacoma and some moved around some of my network gear for my home network. I got the log splitter out and was able to get the two logs blocked up, split and stacked before it got dark. I also put the log splitter back in its place in the lean-to. These two logs were pretty heavy. They are 80" long, not sure how big around they were.

 

[Bmyers]

Spent yesterday working on an old fence row. Took at a bunch of old brush and down trees. Took out the rest of an old hog building. While I worked on that the nephews and family were riding four wheelers and enjoying the day. We stopped for lunch and had a barbecue. So thankful for the grapple, it made easy work of the projects which would of taken me two to three times as long if I had to get out and chain everything to remove it all.

Made for a fun and productive day.

 

[Fordtech86]

Made an unexpected up north this past week, while there we loaded up the old Ford that’s been in dads shed since I was 3 or 4. Great grandpa bought it new. No Bota up there to load it, but had one here to unload it

Dad had it blocked up on an engine stand to be able to move it around his shed, no front axle on it currently…

Used the Bota to pull to the ramps while son ran the winch.

The Bota picked the front off the trailer and brought it to the carport for now.

 

[fried1765]

Made an unexpected up north this past week, while there we loaded up the old Ford that’s been in dads shed since I was 3 or 4. Great grandpa bought it new. No Bota up there to load it, but had one here to unload it

View attachment 116822
Dad had it blocked up on an engine stand to be able to move it around his shed, no front axle on it currently…

View attachment 116823
Used the Bota to pull to the ramps while son ran the winch.

View attachment 116824
The Bota picked the front off the trailer and brought it to the carport for now.

Do you know if it is a 2N, 9N, or 8N?
They are simple bulletproof machines, but certainly do lack sophistication.
Very poor with a loader, due to no power steering.
I have a 1951 8N, in excellent (refurbished) condition, and really should sell it.
I have owned it for 51 years, and am struggling with nostalgic thoughts of it leaving.
Yours has a very personal history...mine does not.

 

[Fordtech86]

Do you know if it is a 2N, 9N, or 8N?
They are simple bulletproof machines, but certainly do lack sophistication.
Very poor with a loader, due to no power steering.
I have a 1951 8N, in excellent (refurbished) condition, and really should sell it.
I have owned it for 51 years, and am struggling with nostalgic thoughts of it leaving.
Yours has a very personal history...mine does not.

It’s a 2N. We still got the original steel wheels that came on it new. I’ve never seen the tractor run. We started taking it apart years ago and dad did a little more after I moved away. Engine has been rebuilt but just need to get the rest of the tractor assembled and painted.

Will just be used around here to compliment the kubota with garden tasks pretty much.

 

[je1279]

Converted from summer configuration to winter configuration.

 

[Magicman]

I was finally able to finish bushhogging that last 15 acres today.

About 5 more acres to go chopping down mostly Sweetgum and Persimmon sprouts.

Yea, Finished !!! The two pictures are taken from about the same location. My intention is to spray herbicide on the stubs to help to prevent this next year.

 

[Jsjac]

This week I put on the snow blower.
Cut a couple of logs to keep people from driving down the old ditch road.
I am working on making a new tractor road down to the bottom. So I no longer need to use the ditch road.

 

[The Evil Twin]

Have you considered getting a grill guard to protect the radiator on your L2501?
Lown ( brand ) seems to be the most popular here on OTT.

I actually picked up a Kubota guard for $200. Dealer ordered it for someone else and was selling it for cheeep. The mesh could be a little tighter, but nothing has poked through yet. Between the grate on the back of the grapple and this, doubt it will.

 

[RCW]

Not much. Waited until today to get some winter blend diesel.

Filled tractor up and let it run to pull it through the system. Dosed the fuel with Power Service White bottle and a little Power Service Bio Kleen.