What did you do to or on your Kubota today?

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,115
2,258
113
PEI Canada
Used the forks to load the FDR2584 onto the trailer, taking it out to my parents barn for the winter. Traded my box blade in for a GS1560 Landplane. Gave it a test run on the driveway. Found it to be a bit aggressive so I need to readjust the blades.
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,022
3,675
113
Wind Gap, PA
Got the #3's and millings roughed in yesterday after work. Hope to dress it up with final grade after work today and call this project DONE.

rough in millings2.JPG
 
  • Like
Reactions: 6 users

Biker1mike

Well-known member

Equipment
B6200, Kubota 2030 Front Blade, King Cutter 60" finishing deck
Jan 11, 2022
1,177
1,278
113
Gallatin, NY USA
Did my last 300 hour maintenance , I think. Grease, gear oil, and hydraulic fluid. Hopefully we will be in a low to no maintenance abode before the tractor sees 300 more hours on the clock.
Stone driveway, so laid down plywood and worked on the ground. Between getting older, way too much stomach fat and recovery from quad tear I am more than happy to not do this any time soon.
Still looks pretty good for 36 years of earning it's keep.

tractor_1011.jpg
 
  • Like
Reactions: 8 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,022
3,675
113
Wind Gap, PA
That's a wrap...finally.
I had the get the obligatory pic with the Oranges.

finish 1.JPG


finish 3.JPG
 
  • Like
Reactions: 12 users

Trapper Bob

Well-known member
Lifetime Member

Equipment
L4701, Wicked grapple, 6’ bush hog, pallet forks, 7’ box blade, 6’ Wicked bucket
Jan 17, 2022
445
811
93
64
Andover, KS
Played fetch with the Kubota today.
8F414838-7094-49CC-81A7-EB0D5536DF13.jpeg
 
  • Like
Reactions: 10 users

Trapper Bob

Well-known member
Lifetime Member

Equipment
L4701, Wicked grapple, 6’ bush hog, pallet forks, 7’ box blade, 6’ Wicked bucket
Jan 17, 2022
445
811
93
64
Andover, KS
Yes, & there are plenty to choose from for corner posts. These are going to be turned into BTUs.
7EBDB51F-4ECE-421A-A853-4B2B25A3AF8B.jpeg
 
  • Like
Reactions: 2 users

rc51stierhoff

Well-known member

Equipment
B2650, MX6000, Ford 8N, (BX sold)
Sep 13, 2021
2,557
3,073
113
Ohio
Today we mowed/brush hogged for last time this season, tilled and the fall planting, and then did some leaf lovin’ and pics(leaves seem to be turning and some good color and slightly overcast)
 

Attachments

  • Like
Reactions: 5 users

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,142
5,209
113
Chenango County, NY
Checked inventory for fall service.

Not my usual, but think I’m going to skip the oil change with only 31 hours over last year. Oil just started to get some color to it last month or so.

Didn’t have to move snow often last winter, and summer was dry so didn’t mow much either. Often do 20-30 hours over the winter season.

Maybe I’ll do it in the spring. Only takes a few minutes.
 
Last edited:
  • Like
Reactions: 1 users

ACDII

Well-known member

Equipment
L4060HSTC-LE, loaded. B2410, L352 Loader, Woods BH70-X backhoe
Oct 21, 2021
678
421
63
Illinois
Yeah, it will be fine, no need to waste time and money on perfectly good oil. Been doing that for years. Today I went and bought 3 tons of pellets, they were finally on sale, though not as low as last year, still much less than what propane costs. Finished the install for the whole house pellet stove in the basement yesterday, ran ~ 24 hours now, with a time out during the night when it ran out of pellets, but raised the temp in the house 4 degrees so far, and once it reaches equilibrium, will burn far less fuel. That coupled with the one I installed last year, should cut propane use in half or more. Thats a $1600 savings or more during the winter, and taking from that the cost, of the pellets, ~ $900 in winter savings. It might even be higher than that once I get some venting in place to get more of the heat to get upstairs. Right now it is convection heat, floors are nice and warm.

So, what did I use the tractor for? Moving around the pallets of pellets. We unloaded half of one, leaving 1000 pounds on the skid, and moved that to the barn, then the second ton is on the trailer, moved that into the barn on the trailer for now.

Oh that cab heat is NICE!!! I Like my tractor. I do need to get the tires filled and add a weight box. I am thinking, I have this bed box and 2" receiver bracket for it. I can attach that to the trailer mover and add some weight to the box, that should help a bit.
 
  • Like
Reactions: 1 user

NCL4701

Well-known member

Equipment
L4701, T2290, WC68, grapple, BB1572, Farmi W50R, Howes 500, 16kW IMD gen, WG24
Apr 27, 2020
2,790
4,230
113
Central Piedmont, NC
Moved this rather large (1 whole cow/4 adult bodies depending on how you look at it) 1960’s Clark freezer a couple hundred yards from the basement of one house on the property to the garage of another. Nothing but about 20lb of venison in it right now.

Always heard moving a really old freezer like this is pretty dicey as they don’t like being jostled around and often won’t restart after a move. Why that is, I don’t know. Might not even be true. True or not, I drove REALLY slow up the gravel drive. About the same speed as that thing they built to move the Saturn V rocket to the launch pad.

Freezer seems to be working fine so far.
540B36D1-B502-456F-9735-900774C767D5.jpeg
7E1FC362-DE99-4B52-832D-B8A6B835F01F.jpeg
 
  • Like
Reactions: 6 users

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
The reason that they don't work after a move is that the oil in the compressor gets tossed around, and sometimes migrates to places that it doesn't belong. That is why you should wait 24 hours after moving a refrigerator or freezer before plugging it in after the move. The oil has a chance to settle back to the bottom of the compressor housing. Very similar to when you put your tractor on its side, you don't try to start it for a day to allow the oil to settle back into the oil pan.
 
  • Like
Reactions: 6 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,317
6,312
113
NW Montana
Cleaned both tractors inside and out, greased the MX loader and chassis, repaired one of the hammers on the flail, moved trailers around and finally got around to bringing a bunch of logs back to the house that I cut up on my neighbors property months ago. The M handles the big 16' dump trailer without any fuss at all, with the exception of the lift arms banging the trailer frame in tight turns!

For you diesel fans out there, I added the LMTV and M6060 photo. The LMTV has a Caterpillar 6.6L inline 6-cylinder engine.

m6060_mid_sota.jpg


m6060_pj_dump.jpg


m6060_lmtv.jpg
 
Last edited:
  • Like
Reactions: 8 users

cmorningstar01

Active member

Equipment
B7500HST LA302 FEL 5'Finish Mower B5100E 46" Snow Plow 22 ton splitter
Mar 27, 2011
341
81
28
Pemberton NJ USA
I have been away for a while with lifes obstacles(cancer/chemo/radiation) but it is fall and I needed to get on that wood I had dumped , So I hooked the 22ton splitter to the B5100E and used the B7500HST with a log pinch to load the big pieces on the splitter, yes I know the splitter tilts down to load from the ground but for me this worked out just perfect
20221010_122426.jpg
20221010_122435.jpg
20221010_122438.jpg
20221010_122452.jpg
20221010_122501.jpg
 
  • Like
Reactions: 10 users

bucktail

Well-known member

Equipment
L1500DT, 6' king kutter back blade, boom, dirt scoop ford disk JD212
Jun 13, 2016
1,251
189
63
MN
I have been away for a while with lifes obstacles(cancer/chemo/radiation) but it is fall and I needed to get on that wood I had dumped , So I hooked the 22ton splitter to the B5100E and used the B7500HST with a log pinch to load the big pieces on the splitter, yes I know the splitter tilts down to load from the ground but for me this worked out just perfect View attachment 89001 View attachment 89002 View attachment 89003 View attachment 89004 View attachment 89005
I've never liked splitting vertically. The log doesn't stay put as well and you're working hunched over.
 

The_Wingnut

Member
Lifetime Member

Equipment
Grand L4060, ZD21, ZD28, ZD331, RTV X1100C, Branson 3820, JD 1020, JD 50
Dec 8, 2021
91
63
18
61
Tyner, NC
I have been away for a while with lifes obstacles(cancer/chemo/radiation) but it is fall and I needed to get on that wood I had dumped , So I hooked the 22ton splitter to the B5100E and used the B7500HST with a log pinch to load the big pieces on the splitter, yes I know the splitter tilts down to load from the ground but for me this worked out just perfect View attachment 89001 View attachment 89002 View attachment 89003 View attachment 89004 View attachment 89005
Best of luck to you! Sounds as if life's challenges have been hard fought! Like the way you handled the larger pieces, my back would probably be in better shape, if I would have done that in my younger days instead of wrestling them by hand.